开云体育

Mick I cannot help with your specific log alarms. I start by going to the Pallet tool and finding any nodes that need to be updated. I update each. Re-Boot. Then, I open a debug node on each Node-Red

The WiKi was updated to show how to load .Net 5.0.8. Don’t know if that will help. My Green Heron RT21 just arrived and will be wiring that up. When done I wanted to build a new Pi4 using 32 bit OS.

I recently upgraded to Node-RED 2.03 and? dotnet 5.0.5.? ?I noticed I am getting error msgs like below: Jul 29 16:55:44 raspberrypi dotnet: Radio Meter AM Signal strength after AM - NO Data Ready

Read the comment node for info on replacing the inject and TCP Request nodes with a USB request node for your usb to serial adapter (Kenwood radio CAT needs to connect to the Pi.) If you need to share

David thanks ...... I'll send another thankyou once I figure out how to load this into my node-red library and what it all means? ... 8^) I finally found a good beginners tutorial

I just looked at all the tools on Github...Looks like it's SmartSDR for linux...Have you run flexclient and all the other tools on a linux device?? I am thinking this can't run on a pi effectively.

The following files have been uploaded to the Files area of the [email protected] group. * /Node-Red DAX and CAT/MQTT nDAX nCAT.json ( /g/nodered-hamradio/files/Node-Red DAX

The following files have been updated in the Files area of the [email protected] group. * //Node-Red DAX and CAT/nDAX nCAT.json ( /g/nodered-hamradio/files//Node-Red DAX and

The following files have been uploaded to the Files area of the [email protected] group. * /wo2x flows/Kenwood CAT to relay example.json ( /g/nodered-hamradio/files/wo2x

Hi All, Someone was asking about taking Kenwood CAT and driving relays. Here is an example of how to take KenWood CAT, convert it to band, then send a different number for each band. To test this I

You can use the EXEC node to run batch files on a Windows install as a work around. 73, Marty WD9GYM

The 8 relay switch I have is a Lan connection, UDP , I also run PstrotatorAz for automatic antenna switching based on band choice . Dave still working great thank you for all the work you do . W7nik

Provides a Dashboard interface to setup and use the KC2G nDAX and nCAT for Linux machines. ?I am using it to provide DAX and CAT for WSJT-X running on my Raspberry Pi. Must be used with Flex Firmware

The following files have been uploaded to the Files area of the [email protected] group. * /nDAX nCAT.json ( /g/nodered-hamradio/files/nDAX nCAT.json ) *By:* Alan Blind,

there are number of KMTRONIC 8 way switches I have an usb version (windows version node-red)) I found it easy to control via windows batch file? eg c:\kmtronic\USBRelay.exe -c:10 -r:2#1 Then in

Without loading it I believe it was for the Ethernet version. Also there is a 1.0 and 1.1 version (hardware)’ Gotta get some sleep. Catch u tomorrow. Dave wo2x Sent from my waxed string and tin

The readme was a mistake. I used the DLI as a basis for the KMTronic. What issue u having problem with? I’m just heading to bed. Now 1:22 am. Feel free to email me direct at my call at arrl dot net

Is this KMTronic flow for a ethernet or USB switch?

Ok, this one I am trying to use is called?KMTronic 8 relay UDP.json and it has this note in it thats why I was confused.

It is in the file section /g/nodered-hamradio/files/wo2x%20flows/KMTronic%208%20relay%20UDP.json Sent from my waxed string and tin cans.