开云体育

I just checked it here by putting a debug node in the HFAuto flow right before the UDP send node for HFAuto port 12070. I am seeing the XML documented formatted message with correct frequency. Try

Hi Mark The issue when you do a sub meter all to a 6700 and a 6600 the 6700 has internal FC bolts as meter 20 while the 6600 has it as meter 21. I do not have a 6400 or 6600 to dig into to find out

I will check this a little later. Dave Sent from my waxed string and tin cans.

Mark A great lesson on the workings of multiplex API. So....the port must be changed based on which client is "bound". OK. FYI, the normal Node-Red TCP nodes do not allow for changing the port number,

Dave, good morning. Quick question, did you update the HF Auto software? I did this morning and the node red flow is not working with HF Auto. Programs opens but make no connection to UDP and keep

The port number used is a factor of the ports in use at the time of client initialization. The FlexAPI attempts to create a exclusive UDP Socket at Port 4991, if that fails it will try the next and so

You have a 6400 or 6600? Change sub meter 20 to sub meter 21. For whatever reason Flex added an extra meter on the 6400 and 6600 series radios. 73 Dave wo2x

Just heard you ta lking about this group on Ham Radio Workbench. Had to join, as I hope to dedicate a raspberry pi to Node Red and MQTT for remote monitoring of radio and other shack equipment.

I am not saying who or what caused me to draft the original email. Not to worry, it was all in good fun and thought I would pass on the message. Mike va3mw

Neal Dave, WO2X, says the Flex Meters, are work in progress, as he is trying new parsing techniques on the VITA49 packet to improve its reliability. Alan

Count me in if you need a beta tester. Cheers, Neal, N6YFM

Hi: Today I downloaded from the files section Flex Radio V3 flow.? I changed the IP address of the TCP IN node to my radio. While the following do seem to work; TX VFO (at least to 4 digits after the

Hey Alan: Don't worry about being a "poster child"? (A.K.A. Being Human). The ONLY thing I hate more than perfect people, are people who THINK they are perfect :-) The rest of us....? ?we tend to

Dear all, I was working on an alternate flow for my DLI webswitch and came up with this flow. I know probably there is an easier way of doing it, but at least I got it working. Feel free to try it and

Hi Alan, Thanks for sharing.? Our club is in the midst or integrating a FlexRadio 6600 into our station for remote operation.? Like you, we're going to use a RPi to control relay, including remote

I am probably the guilty party/poster child for Mikes's phone call from Tim. My Flex 6600 has experienced what I call, "uncommanded" short duration shutdown, and reboots. I use the Flex remote on/off

Hi All (having just got off the phone with Tim) If your radio is doing weird things, before you open a support case, please make sure that NodeRed or some other external software is not causing the

Welcome Neal!! :) Sorry, I am up to my neck in media for the QSO Today Expo, so I haven't had a chance to jump in. Mike va3mw

N6YFM would be interested in purchasing a board, and if you still have, cable and header. Please advise. 73 (Info good on qrz.com)

Mike: Make that 42 members :-) Cheers, Neal, N6YFM