开云体育

If I get a new Pi, ?what do I want? ?Lots of “kits” available!? Sent from the all new Aol app for iOS

Good day, Alan, and all.? Alan, Your Flex 6000 and SPE flows are working great on my Windows 10 PC.I purchased a Raspberry Pi 400 to use as a stand alone node red unit and I would like to replicate

Simple. I can use node red from any web browser on any phone, tablet, or computer. But I can only do that if node red is always running and listening. If I am going to run something 24 by 7, the

Dave I worked as a programmer for over 40 years. Programming itself is addicting to me. But IBM did so much of the heavy lifting it’s irresistible. 73, Marty

I would recommend not formatting the RigPi card. MFJ charges for the RigPi SD card image. Best to keep it in case you ever sell or reuse the RigPi. Dave Sent from my waxed string and tin cans.

It is addictive, right Marty :-) Dave wo2x Sent from my waxed string and tin cans.

Start with the instructions in the file section and a new SD card or format the card you have.? 73, Marty wd9gym

They make chocolate ice cream and vanilla. Seriously even older Pi’s have enough power to run Node-red 24X7 without breathing hard. They draw a low amount of power.? When I started I used the

I would suggest getting a new microSD card and then you can use the Pi from the RigPi. Reason I suggest getting a new card is MFJ charges for the RigPi software. So, get a new card to load the

I’ve seen it. ?I want it! ?How do I make that happen? Also I’ve got a RigPi gathering dust. ?Is it useful for Node Red or do I need a new virgin Pi? Thanks! Ty K3MM

I will chime in on this with a comment. I have a flow which sends the radio’s TX frequency to a GHE antenna switch. I wrote that for Santiago. That flow can probably be used as a starting point for

Because it’s WindoZe. ?LOL. ?It has enough to do and fragile enough already without running some experimental code. ?At least that’s my take on it. 73, Ty K3MM? Sent from the all new Aol app

Andre Best we talk on the phone. Lots of questions and lot of options depending on what your goals are how much time you want to spend. I looked over your QRZ page and I see you have lot of devices!

Alan, in my case I am running GH server on a windows PC and all rotors are also connected to the server PC. If I ad a Raspberry Pi to this does that mean the PI will connect to my GHE remote devices

I can think of two words Windows updates. Last thing you want is to have the PC at remote crap out leaving you without ability to turn things on & off. The Raspberry OS is very stable. My Pi running a

Dwight. No, the other way around. Devices are connected to the Raspberry Pi and you command the devices using Node-Red using any Web Browser. The web browser can be on any device of your choosing. I

Another consideration, I forgot to say, and the most important. If you use a Raspberry Pi instead of Windows, you do not have to "fight" the windows firewall and other security things it does. I use

Thank you Alan ... so I assume all the devices are all physically connected to the Windows PC and they are all addressed or controlled from the Rasp PI thru the IP? 73 Dwight NS9I

For me, since Node-Red runs in the background, I prefer to keep it off of my Windows PC. Also, I power my Raspberry Pi from my station 13.8VDC UPS, so it is not affected by losses of AC power. Also, I

Curious as to why most seem to be using a Rasp PI to do the node-red thing on rather then the windows PC? Thanks 73 Dwight NS9I