开云体育

Thank you Mick Node would not download yesterday using either the pallet manager or command line I successfully downloaded this morning using pallet manager without having to reinstall Node-Red

The OpenWeather node is located here in the flow... You will probably need to install the node from the pallet manager Once installed you will need to create a account and get an api key.? I also see

Hi Mick I am having a problem locating the openweatherMap Node module which I need to run your weather flow Can you point me in the right direction?? Thanks, Ryland WW4GA

Hi Mick I am having a problem finding openweatherMap node so I can install Can you point me in the correct direction? Thanks, Ryland WW4GA

A really good video on how to install HamLib on a Raspberry Pi and use a standard set of commands no matter what device you plug in. https://youtu.be/R4Dx4mEffzg?si=E7942h5Q7yWdKueh 73 Kyle AA0Z

If you missed my Node Red at Hamvention, here it is: https://www.youtube.com/live/4pyNZPshXZ0?t=19943s We did something a bit different for this forum.? I didn't want to run through the slides that

Sorry for the delay here.? Hamvention has delayed everything as I'm just getting back into the swing of things.? The CP2102N should be included in the kernel.? Not sure why it's not showing up.? I

Doing some more research I'm thinking I need to install the USB driver for the Silicon Labs CP2102N onto my nodered RaspPi.? I downloaded the linux driver and have these instructions. I'm not sure

If I understood correctly your needs I solved 232->Eth conversion between my Node Red "Acom 600s web console" and the PA via its rs232 port by using an external (cheap) box (

Hi Dave.? Been a while.? I originally had the RAAS-8a plugged into a PC and was using WA4MCM application to control it.? It worked well from the PC.? When I plug it back into the PC I see the

Hi Domenick Is it possible the USB device is showing as a USB HID device? The LP700 wattmeter is like that. What happens when you plug it into a USB port on the PC? 73 Dave wo2x Sent from my waxed

Hello.? Thanks Kyle for the information!? I'm following your instructions and also using the YouTube video to install Ser2Net.? My goal is to make use of the NodeRed flow to control the RAAS-8a

Version 2.1 addresses a minor bug that occurred when the probability of the predicted R value for 1-2 and 3-5 was the same but very small (e.g. 1%). This brings up a problem with a lot of APIs that I

Dear group, G0ABI asked me to also announce in this group. I created a dashboard for the Kuhne Electronic 2.4GHz up converter to visualize some of its values available on the serial port. The code has

Craig, Attached is my flow for the navbar.? ?The flow shows the current solar idx's along with any geo magnetic storm alerts.? ? ?It uses OpenWx for the current temp,? wind direction,

Hi, Does anyone have a copy of the ToolbarSolarWxLightningUtcClock.json flow created by Mick, W8BE? It's not available in the files section anymore...?Original link:

Thanks Kyle. Unfortunately, I will just be arriving around the time of that forum so will probably not be able to be there. However, I look forward to watching it on Youtube after the fact. Thanks for

Thanks for posting these! I can’t make the morning one, but hope to join in the afternoon. Be seeing you there!

And to add a V3 layer of security, you can use TailScale or other VPN to access the Node Red web page. I do that with both remote accessible stations. TailScale works very well. 73 Dave wo2x Sent from

You can build each of your antenna switch / rotator boards with a ESP_Async_TCP_Webserver, using websocket and create a simple WEB server to control it. Then you can make a noder-red flow that