开云体育

I used DuckDuckGo, (google bad, lol), results: node-red-contrib-ip <https://flows.nodered.org/node/node-red-contrib-ip> This simple *node* returns the internal or public *IP* *address* of the

The StepIR for both antennas can be configured to track the flex frequency. ?There are two ways to do this. ?First is to set up CAT control from the Flex Radio, one USB port to each SDA controller

They recently added a secondary WAN connection at the Red Cross where our Club has its remote flex 6400. ?Our equipment is only accessible when it is on the primary WAN connection since the secondary

I must be doing something wrong.? I can't find your project in Files.

I am currently using as modified ( I added some things) version of Wo2x flows to control my station. I am modifying my antenna system which will have a StepIR Big IR Vertical and a Urban Beam. I

Thanks for sharing. The "robertsLando/node-red-contrib-usbhid" node can be difficult to get up and running. I had to recompile it on my Mac OS hosted Node-RED server. 73, Scott AK5SD

Laci Ok. Sao what is the issue. you need to connect some relay board to your node-red server. Enter you longitude and latitude in the function and if the result of the caclulation is less than some

I am using the W8BE node red lightning flow , which I would like to use to switch a relay that disconnects the amplifier.

There is a node-red flow that polls the litigators site and tell you how far away a lightning strike is detected. There are a couple of different flows in the file section. No need for any sensor

Hello Laci AMS AS3935 Franklin Lightning Sensor can detect lightning near your QTH. Once detected, nodered can be used to control a coaxial relay or if using a mechanical relay, a servo can be used to

Yes? Marty

Hi guys , can the Lightning node red application control a switch ? If I am not near a computer and lightning activity is closer than for example. 5km then turn off the radio and the amplifier. 73 DE

Hello All, I am sharing this information for the LP700 and LP500 users in this group. Recently I was helping my friend in VU to upgrade the NodeRed Setup to the latest NodeRed version. We have

Patrick, There are two APIs... See below: api : object FRStackWebApi : "http://127.0.0.1:5025" FRStack : "http://localhost:13522/api/" The FRStackWebApi is for a linux or OSX platform.? ? The 2nd

Here is the final url configuration for SD to FRStack on a Pi for anyone following along. The URL is your Pi's IP address then :5025

All issues 100% rectified. I was missing a / on the SD buttons I have that choose specific slices. Apparently it didn't matter with the /api/ on the windows URL, but it was a show stopper on the Pi. I

Also Windows version of REST command use the /qpi/ and Pi version does not. It is in the help section on FRStack site. 73 Dave wo2x Sent from my waxed string and tin cans.

Progress!!! Changing URL1 to my pi address and :5025 seems to make about 90% of the SD functional. Oddly enough the only thing I'm noticing that isn't being recognized is the changing the active slice

Ok I'll just wait until someone chimes in. I'm sure it's just a URL change in the rest commands on the SD, but I can't quite figure it out. I tried the IP address of my Pi with port 5025. It's cycling

Patrick, Port and URL are different for Unix Rest commands. 5025 is the port. Forget the URL and not in the shack. Ron WB2WGH [email protected]> wrote: