开云体育

Thanks for the map, but it does not have the home location, the file name says DM 34, and it should be DM43CR. 73, Steve WS7O. | Scottsdale, AZ [email protected]> wrote:

Looks like beat me too it. Thanks Davea Ron WB2WGH [email protected]> wrote:

Here you go Dave wo2x Sent: Monday, January 20, 2025 4:16 PM To: [email protected] Subject: Re: [nodered-hamradio] How to Create an Azimuth Map? Hi Ron, If you have time I could use a map for

Hi Ron, If you have time I could use a map for DM43CR. No hurry. 73, Steve WS7O [email protected]> wrote:

Sounds good. 73, George / W7GES

Map sent. Had an emergency and was away Sat and yesterday. Home now if you need help with the flow. 73 Dave wo2x Sent: Monday, January 20, 2025 9:34 AM To: [email protected] Subject:

Hi Justin I have done exactly that with the rotor flow you have using N3FJP AC Log. When rotor flow is in tracking mode it can receive azimuth from AC Log. Also there is a callsign window in the rotor

Debug nodes on the output are your friend!? If you want to post a screen shot of your flow for the KAT, we should be able to give you a idea where you should start to debug. 73 Kyle AA0Z

Folks, I’ve got the rotor flow designed by Dave wo2x, and it works well when I enter a degree heading, and turn the rotor to what is specified. However, I’d like to find a way to implement

Hi George There are a couple of things you need to change in the TCP request node. One is to keep connection open. Second is the end of string terminator. I have to check my notes but I should be able

If you two have any difficulties at all send another message in a few hours. I have a RT-21 set up for Tornado Tuner control over TCP via Node-Red. I remember there was some small difference

Hi Kyle I was away yesterday. I will be home in about an hour. Give me a call then Dave wo2x Sent from my waxed string and tin cans.

A friend of mine got an GH RT-21 rotor controller and got it talking on the network.? The internal web server is at :8080. I'm looking at the current RT-21 flow in the files section and looks like it

Kyle, 2 style maps attached. 73, Ron WB2WGH [email protected]> wrote: -- Ron

Kyle, send me the location info and I'll get it back to you ASAP. Ron WB2WGH [email protected]> wrote:

I looked in the group and can't find specific instructions.? Anybody know where to make this type of azimuth map centered on a grid square? Can't get a hold of the person who usually helps with it

Good evening. I have noticed on my KAT flow that when i push the button to toggle my antenna it works for a little bit but then? when i press it later on or if i come back and press it, it does

Hi Pat Thank you for the reply Here’s a screenshot of where I get to, this is where I would login to Wavelog, however when entering my user name/password it will just got to a webpage that says

Does anyone have a lightweight small rotor control for a Yeasu G-2800DXA? I tried to reduce the size of one posted here, however it works displays the position correctly for a second and truncates the

Not much info to go on but I can try. You mention cloudlog, is it using your credentials to authenticate via cloudlog and perhaps can't reach that server? What does a web developer tool/network