开云体育

Tim Profiles are under "sub radio" When you first subscribe you will get a full list of profiles. Thereafter, the list will be resent if there are changes. Alan. WA9WUD ---------------- SUB RADIO

I am trying to retrieve and display the active profiles and TX delay.... I have found the list of SmartSDR TCP/IP commands, profile is listed but it only discusses loading profiles..... Any guidance

Been there all along. I just never tested or used it. I did not save the test flow I made. Relatively simple to reproduce. Just send 'sub spot all' sometime after the radio is connected and it will

Is this a new feature, or has it been available all along? -- Gary Young ?Operations Manager - ?Systems Engineer | Telecommunications Engineering Associates

Thanks, Steven. Do you have an EXPORT of this flow that you could attach to save me some data entry? Thanks again!

Good news, yes, the radio report out spots and you can get them in Node Red. Upon startup send the radio 'sub spot all' and it will start sending you the spots that it is getting from the external

node-red-contrib-remote had been working perfectly. I had to rebuild my Raspberry PI OS after it became corrupted. I reinstalled node-red. I imported the latest of my flows. Remote-access node

Thanks, Steven. Makes sense. I will restate (again).... Is there a flow that takes the CW RBN Spots that I am currently feeding to my FLEX with SliceMaster (I guess I could also use FRStack) and move

Thanks for the reply.? Not asking for a CW Decoder (my brain was sorted most of that out). Let me restate:? When I turn "Spots" on in the FLEX I see callsigns on the waterfall from the CW RBN.? I

If you have software that feeds spots into the radio, I believe there are messages that resend them back out to clients. You would need to have something reporting them to the radio in the first

The Flex does not decode CW. You can feed DAX IQ out into a program such as CW Skimmer. 73 Dave wo2x Sent from my waxed string and tin cans.

Is there a flow that polls the Flex and spits out a table (or a text file) with the CW spots that the Flex is currently seeing? Thanks!

Hi there, I’d love to get some help getting some kind of a flow that would allow the ts-890 to be operated remotely. Currently I use the ts-890 via the ts-control software for the Mac, but it would

Hi Justin, There’s a flow I placed in the files by type radio section for the TS-890 I use it primarily to interface with the spectrum window of N1MM via the TS-890 Ethernet port. My flows are used

Mick I think you are already doing this, but to be clear just in case. Use the "connection/tcp" message and watch for the "connected" and "disconnected" payloads. The TCP connection happens after the

Excellent!

Folks, Has anyone created any flows that pertain to the Kenwood ts-890? THanks, Justin-ai5os

Ok, no problem. I just thought it would give you an idea as to when the injection the initial commands and how I tell when to do it. 73 Dave wo2x Sent from my waxed string and tin cans.

Mick Look at my v16 Flex flow. I use the client connected status to send sub commands but only in beginning. You absolutely do not want to send unnecessary TCP commands while a client is connected. It

did you ever find a solution?? if yes, what was it