开云体育

All, Thought I'd share my latest updates. Loving the new rotor control. Working on making it even more useful to some of our folks in our group shack. This screen will be in our group shack above the

Just be careful. If you have Flex data going to the KAT500 full time then you will not be able to manually control the tuner. The Manual commands would get overridden by the info coming from the Flex.

I'd love to see this solution, as I'd like to do the same thing!!!!! Kyle

I am relatively new to Node-Red and started using it before I found this group. It's loaded on a Pi 3 B+ with a 4 relay pi hat. * three relays are used to create BCD logic for an Ameritron RCS-10L

Another item you might want to put on the "how to" wish list, and to expand on one of the points I mentioned above is how to go about starting your first flow and maybe the first things you want to

Hi Scott, Glad to have you on board! Here is a link to the LP100 flow from Al, K0VM [email protected] | Files </g/nodered-hamradio/files/K0VM%20Flows> As you update equipment

Hi Kyle! I've just begun down the path for Node-Red use to integrate/remote my station. 2 x Elecraft K3 TopTenBand Decoders drive ICE-419b bandpass filters and SixPack for by-band antenna selection

Today 1/20/21 WA9WUD spent a little time getting me up and running with Node Red. I am very grateful to Alan for the time he spent showing me several commands to enter. Dave he used your Flex flow to

Good to hear you have it working. Other image sizes are possible by changing some of the function code. -- Gary K6HN

Alan, you mean put spacers between the W2 WATT METER and the Flex Radio group so it forces the Flex Meters group to the 2nd row, but then doesn't overlap the lower left hand corner of the Flex Radio

I live around 3 hours from a three tower M/2 contest station and have the opportunity to move my Flex down to the station full time as one of the two operating positions. The contest station just got

As a new user in the last 3 or so months and virtually no programming experience, here are some things that confused me the first time around after the install.? At first I think you very briefly go

I decided to leave the header as a reference at hand. Another way to eliminate the header is to create the map on pdf and use snipping tool to select the desired area (no headers) and save the snip as

For the azimuth map, once I have created it in PDF format I import it to Microsoft Word. I convert to Word document then I can delete the header info leaving just the map. I right click the map and

Gary, followed same principle but created a different map to sort of have a different perspective. It is a bit off center but close enough for the purposes of having an idea. 73, Santiago

Scott The IP address that would give the message you show should be the IP address of your raspberry Pi. If Node-Red and FRstack are on the same Raspberry Pi, use the Loopback IP and port :5025

So I've downloaded this node and it displays, but I get an ECONNECREFUSED error on the GetSPEINFO function.? What am I missing in the setup?? The IP address is set to the radio (192.168.1.34:4996).

Thanks, just did it with same map to try. Will come up with a different map of interest tomorrow. good night. -- ______________ 73 de Santiago HI8SMX - KB8SMX web: www.hi8smx.online (

Yes, just duplicate the Svg node and use a different map. I ended up adding duplicate controls also and then put the US map on another page. I can then select if I want the World or just the US

Interesting. How do you do it? Duplicate the Svg node? Will try it tomorrow. -- ______________ 73 de Santiago HI8SMX - KB8SMX web: www.hi8smx.online ( http://www.hi8smx.com ) YouTube: HI8SMX Twitter: