开云体育

Michael, thank you! Marco, let me compare this to the other API and I will get back to you. 73, Ron WB2WGH

Here is a PDF for the 1K-FA. Michael, AA5SH ?

Marco, I am unable to locate the Application Programmin Interface (API) for the 1K. It appears as though it supports remote control through SPE software. If you happen to have API documentation,

Hi Ron! Thks for the feedback. I have seen this flow but I have read this: -------------------------------- 1) For Series II Expert Linear SPE 1.3K-FA, 1.5K-FA & 2K-FA (testing only perofrmed on the

Ken, Interesting behavior on the delay. I am not seeing that and I have not heard reports of it. If you're available for a Zoom session sometime, let me know. My email is good in QRZ.COM. Please email

Marco, Take a look at this thread: /g/nodered-hamradio/message/9768 and let me know if you have questions. As a side note, you state "output and reflected power". The flow presents

Hello everyone! Has anyone already created a flow for the Expert 1K-FA with the meter bar of the output and reflected power? Like the KPA1500 or similar flow... thks in advance HB9EDM - Marco

Hi Ron.? Just started playing with this and love it.? Thanks for all the hard work.? The only problem I have seems to be a delay in the dashboard updating.? That is, if I click the Input button

Hi Warren I just send you a copy of my rotor flow.... I just can't figure out why I can get the correct info out when I use telnet....and I can see the command going in to ser2net but the answer out

Ben, Are you using the TCP Request node to poll ser2net?? (That's what I do)? I can't tell what your flow is doing from your screen shot. Warren, KD4Z

John, There is a extra space in the HTML tag. This is fixed already in the new rolling release(dev) mode. This is been mentioned also in #9710 ( /g/nodered-hamradio/message/9710 ).

Thanx Connor Also, have a look at the 'Exchange' field on the dashboard image below. It's showing CSS info. Might have a slight typo in it. This is the latest download from Kyle's Github from a day

General Note for all #contest-dashboard members: For all those discussing about the Node-Red Contesting Dashboard, please add #contest-dashboard to the subject line of any new topic so the messages

Hi Patrick The “fix” for PG XL showing high SWR in Joe’s case was to disable the original PG XL flow he had installed then download and install the Power Genius v16 flow from the file section of

Kyle What's the difference in usage between the new flow.json & package.json? And is there a version indication in the update? If not, how do I tell the update has been? successful? Regards John

Glad u got it going. I don’t have an LP100 but will soon connect my LP700 to Node Red. 73 Dave wo2x Sent from my waxed string and tin cans.

Never mind, Dave... I (finally) figured out how to get data flowing! After re-reading this thread for about the 4th time, I noticed that Ed's flow started working when you changed the input serial

Thanks for the response, Dave. I only have one Prolific adapter (I'm aware of the address issues with using more than one), and in fact I swapped it out yesterday for a FTDI adapter.? Both the

Still waiting for Joe to get back to me so I can debug why the flow is not working. Patrick, feel free to contact me direct. My call at arrl.net 73 Dave wo2x Sent: Sunday, January 8, 2023 2:11 PM To:

Thanks Scott, I'm 99% sure the permission thing is a Ubuntu snap 'feature' if I get the strength I'll see what I can do to fix it. Interestingly I didn't have the 0xFE and 0xFD in the boxes I'll give