开云体育

I’m also seeing wonky values in SWR in standby and also values that don’t match the front panel SWR on transmit. I just upgraded now after reading this post and did restart the server. I am using

I attempted to install this flow today but I'm having a similar problem to Ed's in that the serial connection is there, but I have no data coming across. I'm using a Prolific serial to USB adapter,

Nothing has changed in the amp API. Try restarting Node Red server and also double check IP of amp matches TCP node in amp flow. If you still have problems I can help via TeamViewer. Dave wo2x Sent

Good afternoon all, After the 3.7.28 Firmware update my Node Red pages shows infinite SWR at idle and improper redaings when operating Everything else looks ok, Joe WA?O

N6RDF has a pretty extensive page describing the RPi alternatives at https://www.qrz.com/db/N6RDF 73 de K3FZT / Steve -- Steven Davidson K3FZT K3FZT@...

BTW, my Pi 400 shipped today from DigiKey’s MI warehouse. I should have it in a couple of days. They still had seven in stock after my purchase. They are quoting over 52 week lead time on a Pi 4B 4

This is another option, but not a Raspberry Pi 4, which probably has better benchmarks, but will do in a pinch.? I think these are in stock. https://www.inovato.com/ Kyle

I don’t have Icom but guessing. Maybe the function nodes in question are receiving multiple, different payloads and error on the ones not expected. A debug node connected to node feeding function

ok, got the serial error sorted. Something to do with permissions in snaps on Ubuntu. Easiest thing was to use a spare RPi and set that up (I was going to do that at some point anyway). Connection

I am not familiar with the Orange Pi. It states it runs Debian Linux. The Raspberry Pi 400 is the same as my current Pi 4B with 4 GB ram and that runs all my flows fine. The Pi 400 is supposed to have

Hi Dave I have also a RPI-400 and it is running fine whit my node-red project.... But why they put a +300mhz faster CPU on the board and only 4Gb ram.... When you often need morer ram for running your

Just an FYI for those interested. I ordered a Raspberry Pi 400 with 4 GB ram and 15 watt power supply from DigiKey today. This is same as a Pi 4a. With 4 GB ram. It comes in a keyboard case so if you

Looks good! Dave wo2x Sent: Tuesday, January 3, 2023 4:28 PM To: [email protected] Subject: Re: [nodered-hamradio] SPE Linear V1.1 flow uploaded to files section Just for kicks, here's one

After a very enjoyable 2 hours with the youtube guide I started to think about what I wanted to do with my dashboard. I have very few accessories, no rotator, no amp.Just a IC7300 and a cloud based

Nick, I like it and think you nailed it with the new layout. Ron WB2WGH

Just for kicks, here's one more stab at a layout without the meters that apply only to the 2K. Having the three meters lined up seems to make sense, and to do that I moved the input and output related

Dear Connor, My fault about the radio issue. I was sure I created the table radio but I was wrong. Here is how it looks my configuration: Now fixed but I see some other messages which are related to

Window Spy does the trick. Thanks again Neal. Sent: Tuesday, January 3, 2023 07:07 AM To: [email protected] Subject: Re: [nodered-hamradio] Window Position Thanks Neal, Don’t use

Thanks Neal, Don’t use AutoHotKey, but will check it out for sure. Sent: Tuesday, January 3, 2023 06:46 AM To: [email protected] Subject: Re: [nodered-hamradio] Window Position Hi Steve!

Hi Steve! Not sure if you use autohotkey but it has a utility called window spy that I think could help. 73 Neal K3NC neal@...