开云体育

Ben Not directly. Node-Red will adjust the "stacking" based on the browser window's width and "zoom" setting. You have two options; 1- Reduce the browser's width and "zoom level" to force Node-Red to

Hi Alan in the Photo dir I found this picture of W7NIK dashboard.. if you look at this photo you can see that he has "2 window" 1 + 2 at the same row...and that is what I wanted :-) I just can't

Ben Here is another method. On your editor, double click on the dashboard widget (node), you want to move to a different "Group". There is a drop-down selector for "Group". ?Select the new Group, you

You can also Move the placements in the "Dashboard" around with a drag and drop that sometimes gets you close to what you want then use the "Dashboard Layout" to finish the placement. A lot of the

Hi Alan it is not possible?to drag it,,,,so I realy dont get it how you do it? ???? Ben

** Thanks Michael, I will investigate that possibility as there have been no other suggestions thus far. Much aporeciated. Garry M0MGP

I’d there is an API then Node Red can talk to it. Dave wo2x Sent from my waxed string and tin cans.

All can rest well now. ?Thank you for your comments to further improve our Tuner Sweep Flow. ?I?added a "Call Sign ID" module to the Tuner Sweep Flow. After each tune (frequency), either from the

I wonder if it is possible to capture the meter readings coming back from the LDG tuner as well?? In the app they built it has an UI like below, so I would think that has to be coming back into the

The FCC rules are there to protect us from ourselves, I don't think anyone will argue that point BUT, I guess any of us who have an MFJ, Rig Expert, LNA, OLD AEA, commercial Communication test set

I will write an ID module for the Tuner Sweep. ?No big deal. Alan

After 54 years of FM repeater building/maintaining, not likely to be in the cards for analog repeaters. At least in the digital realm, you know the ID programmed into the radio from a hotspot

Only thjng I will add to this is how many people ID when training their other auto tuners or auto tune amps such as the OM2500A, Alpha 87A and other “trained” tuners? I bet a VERY low percentage.

Low power test equipment is not subject to identification requirements.? Your MFJ-259 is not creating RF at 10W plus levels.

How do get my. Nano vna to identify ? -- Nick W7NIK

LOLHave to hook up my CW Key to my MFJ-254B?SWR?Antenna Analyzer now ! ??73 Mike Sent from the all new AOL app for iOS

This is especially useful on 10m. Most of us don’t care about a tuned antenna between 28200-28300 or >29000 if you’re not an AM or FM op. Chuck, W9WLX Sent: Wednesday, July 20, 2022 9:47 AM To:

Now, if every repeater kurchunker would have read 97.119(a) the world would be a better place. :) Mike va3mw wrote:

That is why you can specify frequency ranges and steps. So you could use 3 steps (memories) for the CW/digital segment, then when completed use say four steps for the general phone segment. It will

And be sure that ID is transmitted only in a band segment that you are authorized for. tnx Mike / K5JR Alpharetta GA