开云体育

Now, if every repeater kurchunker would have read 97.119(a) the world would be a better place. :) Mike va3mw wrote:

That is why you can specify frequency ranges and steps. So you could use 3 steps (memories) for the CW/digital segment, then when completed use say four steps for the general phone segment. It will

And be sure that ID is transmitted only in a band segment that you are authorized for. tnx Mike / K5JR Alpharetta GA

Good point. And that means every other SWR plotter program is illegal to use in the U.S. as they do the same thing. Dave wo2x Sent from my waxed string and tin cans.

If you are a U.S Amateur station, one might consider the use of this Tuner Sweep flow in it's current state as not legal in the U.S. per FCC Part 97.119(a)? Station Identification. (a) Each amateur

The following files and folders have been deleted from the Files area of the [email protected] group. * /!1! Flows by Type/SVG Based Flows/Tuner Sweep.json *By:* Alan Blind, WA9WUD

Dave, good job integrating the Tuner Sweep Flow. ?Also, great video! To the Group.....Dave has uploaded two versions of the Tuner Sweep. ?One "stand-alone" flow and another set of flows, a fully

I’ll look at the peak. I used to use the peak but switched to forward with a little hang time in the ui meter node. Remember, power is in dBm, that is why the math. I’ll look into the issue of not

Hi David no hurry...here I am fighting to learn how I can move my "windows in Dashboard" and it is not easy :-( Ben Den tir. 19. jul. 2022 kl. 19.39 skrev David De Coons wo2x < RocketNJ@...>:

Dave, I’m using version 3.6.24 in the amp. I noticed in your v14 flow you use forward power and then do the math. The forward power seems to work correctly in both AB and AAB modes. Within your

Hi Chuck, What version firmware in amp? Have you tried my PG XL flow? I have not noticed issue with power metering but will test again tomorrow. There are two power outputs via API, peak power and

I'm doing a hex to string dump from the PGXL and I get the following: R1|0|state=IDLE bandA=10 bandB=6 bsrcA=Chuck-W9WLX bsrcB=Chuck-W9WLX vac=236 vdd=0.0 id=0.0 peakid=0.0 fwd=30.0 peakfwd=30.0

Hi Kyle, Let me know if you would like remote help. Contact me direct if you like. I’m good on QRZ. 73 Dave wo2x

Hi All, Alan and I have been improving his Tuner Sweep flow and I have integrated it to my Flex Radio, PG XL, and TG XL flows. I have uploaded all four flows as a single json in the file section

The following files and folders have been uploaded to the Files area of the [email protected] group. * /!1! Flows by Type/TUNERS/TunerSweep_FlexRadio_PGXL_TGXL flows v14.json (

Cleared cache and restarted with the same results. wrote:

Restarted several times with no change.

Also, restart the browser and/or clear the cache. Alan. WA9WUD

If the flow works then obviously the nodes have to be there.? ?I would try restarting node red and? see if the nodes show up. -- Mick, W8BE

Thank you. I will take a look. Funny thing is when I deploy the flow, the flow works.