开云体育

I am not saying who or what caused me to draft the original email. Not to worry, it was all in good fun and thought I would pass on the message. Mike va3mw

Neal Dave, WO2X, says the Flex Meters, are work in progress, as he is trying new parsing techniques on the VITA49 packet to improve its reliability. Alan

Count me in if you need a beta tester. Cheers, Neal, N6YFM

Hi: Today I downloaded from the files section Flex Radio V3 flow.? I changed the IP address of the TCP IN node to my radio. While the following do seem to work; TX VFO (at least to 4 digits after the

Hey Alan: Don't worry about being a "poster child"? (A.K.A. Being Human). The ONLY thing I hate more than perfect people, are people who THINK they are perfect :-) The rest of us....? ?we tend to

Dear all, I was working on an alternate flow for my DLI webswitch and came up with this flow. I know probably there is an easier way of doing it, but at least I got it working. Feel free to try it and

Hi Alan, Thanks for sharing.? Our club is in the midst or integrating a FlexRadio 6600 into our station for remote operation.? Like you, we're going to use a RPi to control relay, including remote

I am probably the guilty party/poster child for Mikes's phone call from Tim. My Flex 6600 has experienced what I call, "uncommanded" short duration shutdown, and reboots. I use the Flex remote on/off

Hi All (having just got off the phone with Tim) If your radio is doing weird things, before you open a support case, please make sure that NodeRed or some other external software is not causing the

Welcome Neal!! :) Sorry, I am up to my neck in media for the QSO Today Expo, so I haven't had a chance to jump in. Mike va3mw

N6YFM would be interested in purchasing a board, and if you still have, cable and header. Please advise. 73 (Info good on qrz.com)

Mike: Make that 42 members :-) Cheers, Neal, N6YFM

Mark. That is great news! Thanks for adding your support to the Raspberry Pi and Node-Red! Looking forward to the release. Alan WA9WUD wrote:

Hi Mark, Thanks for sharing. I look forward to trying this out once you release it. Gary K6HN

Thanks Mark! This will be very useful. I have loaded it and will play this afternoon. Having maintenance done to my radio about mid day and will be up and running after. 73 Dave wo2x Sent: Monday,

I am working on a RPi variant of FRStack's WebAPIs. This service daemon will allow you to connect to a radio, select a client, adjust radio and active slice parameters. It will support UDP features,

The following files have been uploaded to the Files area of the [email protected] group. * /wo2x flows/Elecraft W2 watt meter.json ( /g/nodered-hamradio/files/wo2x

Hi Mark Great to see on the Node-Red forum! I like your DLI flow. Simple. Your expertise will be an asset to us novice programmers. Dave, WO2X, on this forum, has been trying to parse the VITA49

I have to check. I pick up band info from my amp. Dave

The following files have been uploaded to the Files area of the [email protected] group. * /W3II/DLI.txt ( /g/nodered-hamradio/files/W3II/DLI.txt ) *By:* Mark Hanson