开云体育

Use VSPE to send the Com port data split from radio and use the TCP server function in VSPE. Then on Pi, use the TCP request node to connect to VSPE on PC. 73 Dave wo2x Sent from my waxed string and

*Hey all, quick question—* I’m running a YSF reflector on a Pi 3 on my local network, and I’m looking for a way to extract some useful data from it to feed into Node-RED or display on a local

*Hey everyone!* I’ve been trying to pull some useful info from my WPSD hotspot (and previously from a Pi-Star hotspot) into Node-RED. The goal is to get data from the web UI—like the last

Good evening :)? I have used Eterlogic VSPE with great success on Windows 11 to work FT8 on my Yaesu FT-Dx10, simultaneously controlling the radio using Node Red. For many reasons, I have decided to

Yes I have dynamic working as it should now. Was a silly syntax error, missing moustaches, I should have know better. Hey, that's a Beatles song, lol. -- 73, VE3CKO Mike Kovacich

Mike, I run mine in Flex Dynamic and seems to work but I select the radio in my main UI flow between the other radios I run here. I have all the Flex Requests, Meters, messages, and Discovery nodes

Ah, I see. I was injecting the msg.radio payload the flexradio-request node messages not including them inside { }, that was simple, thank you Alan. -- 73, VE3CKO Mike Kovacich

Mike I have attached my base Flex Flows - Flex Dynamic Connection - Multiflex - Flex Discovery. After you connect to a radio, and to at least one client, you will see all the flex variables in the

Which of your flows in the group use dynamic connection? I should note I do not see an actual flexradio-radio node (see screenshot). Is this an actual node that can be dragged into a flow ? If so then

I have multiple radios and I prefer to support them with separate pi units. Therefore I use a switch allowing packets with the nickname matching the pi flow through to the display logic. Marty

Mike No issues here with my multiplex and multiple radio flow using dynamic connection I suspect you have hard coded something, like a radio name Alan

I have flows using the flexradio nodes, and since I upgraded the 8600 to v3.9 flow are missing lots of data from the radio. To troubleshoot I disconnected the 8600 ethernet cable, then connecting the

I just VPNed into Justin's system and it looks like the flow is already loaded. Now off to author an email to Jeff of GHE. Ron WB2WGH

Mick, I will hold off loading it. No issue. I suspect the communication issue is RT-21 configuration and not the flows. I'll pen an email later this morning to Jeff of GHE for insight. Ron WB2WGH

Justin, I will VPN to your system today and load the flow today and confirm no gaps. with the palette. Alan, thanks! Ron WB2WGH

Ron, I have been working on my flow and it is not ready for release yet.? ?It is going to take a few days to go through it and re design the issues I have found.? ?So hold off loading my flow so

The following items have been added to the Files area of the [email protected] group. * /QRZ.com Lookup.json ( /g/nodered-hamradio/files/QRZ.com%20Lookup.json ) *By:* Alan

George, thanks! That is the way I have the TCP request node configured. I did find some references in the RT-21 Version 4 addendum regarding command options regarding enabling TCP mode. Seems like a

Not sure if you guys have this working yet but I connect to my RT-21 via TCP via the Ethernet port. I remember having an issue with the connectivity and I think you need to run the RT-21 utility

Dave, That makes sense.? I will do the same thing.? The code originally wrote was based on me only polling when the rotor was moving.? ?I may still play with that but to get the flow back out to