开云体育

If you use a 12 to 5 dc converter, you are just replacing the wall wart with one in different packaging. What value does that add? Also, none of the small 12 to 5 dc converter modules on ebay or

Look on Amazon and they have some quite RF noise wise 12-24v input 5V buck boost power converters though these are a type of switching supply You can buy these at different output currents and I would

Just tried the Brand NEW FlexRadiv5 flows and it does NOT work on the 6700, it is the same as it was with the Broken FAN and no temp thought you would like to know Bret WX7Y [email protected]> wrote:

The following files have been uploaded to the Files area of the [email protected] group. * /wo2x flows/Vita49_FlexRadiv5_Flows.zip ( /g/nodered-hamradio/files/wo2x

Ok great! No need to do anything then. 73 Dave wo2x Sent from my waxed string and tin cans.

Dave, I hope things go well! On my dashboard the meters zero fine when i turn off the amp. ?Also the amp will both turn off and on remotely using the node red dashboard. Take care, Stan, K3PW

You’re welcome! Glad it is working. I am going to look at K6HN’s KPA500 flow either tomorrow or Tuesday to zero the meters. I’m currently sitting in the hospital but hope to get released today.

Thanks, Dave. Great video and Wiki beginner’s guide. ?Both have been very helpful getting me up to speed. ?Yesterday I used the Wiki to get the software installed and today I’ve downloaded and

The difference is how the KPA500 and 1500 power off. I have to see how the 500 does it as that is the trigger to zero the meters. I will not be able to get to this until the earliest tomorrow. I am

I bet whatever you did with the KPA1500 will transfer well to the KPA500 too. Charlie KB8CR

One other thing I added to my KPA1500 flow is when you click the off button the amp does not shut off until the temperature drops to 38c or lower. This allows me to shut down the amp without waiting

I do not have a KPA500 to test with. I can try to update an existing flow with the same “logic” I used on the KPA1500. Dave

Sounds great Dave....I spent 2 hours today watching the YouTube video. It was great. Are you gonna be updating the KPA500 / KAT500 flow too? That's what I'm getting. Charlie KB8CR

You’re welcome. Please read the comment nodes in the flows by double clicking them to read comments. The VITA49 flow needs the ping node changed to the IP of your radio. That is the node that says

Thanks David!

Hi All, I have updated the following flows: VITA49v5 & FlexRadiov5 - These two flows must be used together. I have zipped them into a single file and uploaded them to my file area. Meters are zeroed

The following files have been uploaded to the Files area of the [email protected] group. * /wo2x flows/VITA49_FlexRadiov5_flows.zip ( /g/nodered-hamradio/files/wo2x

That is exactly what my updated Flex Radio and VITA 49 flows do. When there is no client connected Node Red sets the meters to zero. Note – when disconnecting a client it may take up to a minute

I send the meter a 0 when it's turned off. Simple... -- Gary K6HN

Thanks, Alan......the left pane is the one you helped me make. It's working great when the rig is on.? I imported Dave's KPA500 and KAT500 flows, but haven't gotten the amp and tuner just yet