开云体育

Hi Dave, Hay got the Elecraft W2 Wattmeter today and got it plugged in with the included USB serial cable BUT I am not getting anything coming out of the W2 to the FLow wonder when you have a minute

Hi Kevin, Check out my flows in the file area on this group’s site. Read the readme which describes additional nodes you need to install and how to do it. Feel free to load up one of my flows to see

I just got Node Red installed on my Raspberry Pi3 now to figure out my first project!!!!! Kevin w4kjp

I posted a rough How To in a previous message on setting up the Pi with Node Red. You can find archieved messages at /g/nodered-hamradio 73 Dave wo2x

Looks like a great group starting up. Now to get my Rpi3 running node-red! Thanks - Gordon N1MGO

Wow, we are up over 41 members. For those new members, you are in a moderated condition until you post one or 2 items so you are a real ham radio human. Thanks all Mike va3mw

Good morning all and welcome to our new members. A reminder that your first post is moderated. We have three moderators in the group so message approval is usually pretty quick. Second, archives of

Very nice looking! Tomorrow I am going to revisit the parsing of the rfpower= slider value for current TX band. I thought about it earlier and have some fresh ideas. When you do a C44|sub tx all on

Hi Mike, The Smeter flow works using data coming from FRstack. I have no idea how to decode the smeter data stream that comes from the radio direct. VITA-49 is way over my head in coding to decode the

The issue is the messages are not always the same length and the word rfpower= appears over 10 times. I need to look for a unique keyword for the portion pertaining to the transmit slice. The other

Looking forward to Gary’s Github.... Great job Gary!! ____________73 de HI8SMX?hi8smx.onlineHI8SMX on Twitter, Instagram and YouTube

Wow Gary Nice job. Would you be interested in sharing your S Meter flow? Mike

Here is what I would use to get the '23' after the 'out'. string = ' afgfadaefdvdvsdsscdwqout23fdhhgfgsjdgfsdfiop' pos = string.search('out')? ? ? ? ?// find the start of 'out' in the string pos

Hi Gary, I have not gone back to investigate it since posting the question. The radio returns rfpower= for the current TX slice plus every band set up in the TX Band Setting table. I want to parse

I just found this group and look forward to participating. Here are a couple of my current node-red projects. Antenna Switch Control, Rotor Control, S-meter. Receiver antenna preamp and switching.

Hi Dave, Did you et this figured out or is it still an open question? Gary K6HN

Indeed. I have a Green Heron Select 8 antenna switch (not using it wireless but with a RG6 run from roof to shack) with a GH Wireless Base. I use the GH software configured with automatic band switch

Santiago is using the GHE UDP broadcast flow. He can comment on how it works. i had written it for him. 73 Dave wo2x

Hi All, I am running Node Red on a Raspberry Pi 4B 4GB model with 32 GB microSD card but it should run fine on a 3B or newer with at least 8 GB microSD card. I have killed 3 Samsung microSD cards

Thanks Dave, as always. Yes, I know first hand about your availability and helpfulness. This is something I just started planning for 2021, so there is a long way to go, but I will keep you all