Keyboard Shortcuts
Likes
- Nodered-Hamradio
- Messages
Search
Re: Scheduling A Node Red Zoom Trainng Session?
I created a Zoom for this Thursday Aug 5th at 8pm Central if anybody wants to hop on and talk about Node Red.? We'll see if Dave or Alan can stop by to give us some fire power.? I think we might need to have another Zoom for the other parts of the world as Dave talked about in an earlier string.?
?
Time: Aug 5, 2021 08:00 PM Central Time (US and Canada)
?
Join Zoom Meeting
?
Meeting ID: 884 5442 5076
Passcode: 106222
Kyle AA0Z ? |
Re: Problem with TGXL flow
¿ªÔÆÌåÓýI¡¯ve re-read your message Les. I am testing this now. I do not think it is a FlexRadio flow issue. ? Standby ? ? Dave wo2x ? ? From: [email protected] <[email protected]> On Behalf Of Les Brown
Sent: Tuesday, August 3, 2021 4:20 PM To: [email protected] Subject: [nodered-hamradio] Problem with TGXL flow ? Dave et al, ?? I¡¯m running node-red on a Raspberry Pi. I have a Flex6600M, PGXL and TGXL. Everything works well except: If I power down the Pi and then power it on again, it throws an error for the TCP node in the TGXL flow. The only way it will fix itself is if I power down the TGXL and power it on again. Occasionally the TGXL utility on Windows will also exhibit this behaviour, but not consistently like power cycling the Pi. I¡¯m wondering if node-red needs to ping the TGXL to initiate some output from it. Any clues guys? 73, Les VE3NNT |
Re: Problem with TGXL flow
¿ªÔÆÌåÓýHi Les, ? It is actually working as designed. I will explain. ? The Node Red server as I have designed the VITA49 and Flex Radio flows is designed to be running 24x7 and be running before a SmartSDR client connects (SSDR for Win, Maestro, SSDR for IOS, or MAC). If you reboot the Pi, then disconnect your client to the radio and reconnect, it will work. ? Now, why did I do this? We found if you send TCP commands to the radio while it is transmitting will cause ¡°popping¡± in the TX audio. You can hear it on SSB, see it in waterfall on FT8 and mangled CW character(s). The FlexRadio flow only sends the subscribe TCP commands when the client first connects. I used to send them every 5 seconds and wondered why I had the popping on FT8. Took a while to figure it out. ? I could probably look at client connected global variable and wait 10 seconds. If Client Connected does not equal 1 I could have it send the sub commands again. Let me see if that would be feasible. ? 73 Dave wo2x ? ? From: [email protected] <[email protected]> On Behalf Of Les Brown
Sent: Tuesday, August 3, 2021 4:20 PM To: [email protected] Subject: [nodered-hamradio] Problem with TGXL flow ? Dave et al, ?? I¡¯m running node-red on a Raspberry Pi. I have a Flex6600M, PGXL and TGXL. Everything works well except: If I power down the Pi and then power it on again, it throws an error for the TCP node in the TGXL flow. The only way it will fix itself is if I power down the TGXL and power it on again. Occasionally the TGXL utility on Windows will also exhibit this behaviour, but not consistently like power cycling the Pi. I¡¯m wondering if node-red needs to ping the TGXL to initiate some output from it. Any clues guys? 73, Les VE3NNT |
Re: Scheduling A Node Red Zoom Trainng Session?
¿ªÔÆÌåÓýI¡¯m definitely up for a zoom conference!I also have the ?Keyestudio 4 relay board mounted on a RPI 3B and node-red installed, ready to customize.? - Tyler N4TY On Aug 3, 2021, at 9:02 AM, Mark K8MHW <mweisheimer@...> wrote:
|
Problem with TGXL flow
¿ªÔÆÌåÓýDave et al, ?? I¡¯m running node-red on a Raspberry Pi. I have a Flex6600M, PGXL and TGXL. Everything works well except: If I power down the Pi and then power it on again, it throws an error for the TCP node in the TGXL flow. The only way it will fix itself is if I power down the TGXL and power it on again. Occasionally the TGXL utility on Windows will also exhibit this behaviour, but not consistently like power cycling the Pi. I¡¯m wondering if node-red needs to ping the TGXL to initiate some output from it. Any clues guys? 73, Les VE3NNT |
Re: Scheduling A Node Red Zoom Trainng Session?
I would like to join the call as well as I am just starting to study Node Red, having retired only yesterday.
Thus far, set up a Pi4 with Node Red following the WiKi, then followed Dave's YouTube video on the Keyestudio 4 relay board and set this one up to match. It was a good introduction and was easy to follow along on another screen. Thanks for posting guidance for us to follow! -- Mark - K8MHW |
Re: Scheduling A Node Red Zoom Trainng Session?
Dave & all,
So I bought a Pi on Amazon, loaded raspberry OS and node-red.? Imported a couple of Pi-specific flows (temp, CPU/disk usage) to see how they worked, and like I am "now what?"? I could really use some help as at this point I don't have a clue what to do next. Retired in FL and can participate most any time except mornings as we have activities with grandkids.? THANK YOU for offering this training. Rusty - W3US |
Re: Scheduling A Node Red Zoom Trainng Session?
¿ªÔÆÌåÓýI definitely want to be in on this. ? 73, Ed KA9EES The Voice of Fithian IL ? Sent from for Windows 10 ? From: David De Coons wo2x
Sent: Monday, August 2, 2021 10:55 PM To: [email protected] Subject: Re: [nodered-hamradio] Scheduling A Node Red Zoom Trainng Session? ? Hi Rusty, ? I am in New Jersey, USA. Let¡¯s pick a time and see if there is a date and time that is convenient for others. For our European friends, I am available in afternoons which is evening there. We can do two different sessions.? ? I¡¯ve done an ad hoc Zoom meeting which is recorded but wasn¡¯t done with any script. I have it recorded on my YouTube channel. Kyle AA0Z also has some ham radio YouTube videos. ? I think if we do a Zoom meeting taking a freshly loaded Pi then showing how to load the VITA49 and FlexRadio flows, then go through various parts of the flows, showing how we get the data from the radio, extract (parse) the needed info, and then what is done with the data, such as how to filter to get only payloads you want, how to split to send certain payloads to one branch and the remainder to another, how to format data to send to the dash, and last, how to send commands to the radio and get the responses and interpret them. ? Seems like a lot, but once we start it will make sense. ? I am also available for some one on one. ? There were a couple of members who had reached out to me for assistance. I will be contacting those members tomorrow. I had been tied up with another project (I like to keep busy). ? If anyone has suggestions on the Zoom meeting, please respond to this thread. ? 73 Dave wo2x ? -- 73, Ed KA9EES |
Re: File /SatPC - CAT.json uploaded
#file-notice
I use my Desktop Smart SDR for the Satellite station and my Maestro for the HF Station. ?Satellite tracking is from SatPC32 which provides doppler connected uplink (TX Radio Two) and downlink (RX Radio One). ?Also, SatPC32 can be controlled from the Flex Radio. ?All CAT work is done via the Kenwood formatted CAT messages.
One issue was, my Smart SDR, remained "tied" to SatPC32, and I could not disconnect the CAT from a remote position to allow the desktop slices to be re-purposed, while I waited for the next Satellite. ?I could not find any Flex API or FRStack commands to temporary disable Flex CAT or the SatPC32 CAT VFO mode. So.....Node-Red to the rescue. ?I now have a "CAT Control" button on my dashboard. ?I can also control CAT status from other flows, to automatically set up / disable CAT depending on satellite position in the sky. ?Here is my Satellite Screen, with the new button: The flow works by setting up Flex TCP CAT ports tied to Flex Slice A (downlink) and Slice B (uplink) (Thanks, Dave WO2X for suggesting this concept). On the SatPC32 side, I select unique port numbers for each radio (radio one: downlink, radio two: uplink) Next, using "VSPE Manager", set up a port pairs, to match those selected in SatPC32, and a TCP Server, connected to the opposite port pair and to send out the serial connection via TCP: Node-Red is now set up to connect the two TCP streams of Kenwood commands, one to/from Flex CAT and the other to/from SatPC32. ?A "Gate" node is used to "switch" the stream on/off. Alan. WA9WUD |
File /SatPC - CAT.json uploaded
#file-notice
[email protected] Notification
The following files have been uploaded to the Files area of the [email protected] group. By: Alan Blind, WA9WUD <a.alan.blind@...> Description: |
Re: Changing font color by value of msg.payload
Yes, if you connect to the radio as the PG XL client and format the data correctly then technically you can get amp info to show in SmartSDR.
toggle quoted message
Show quoted text
Good one Warren! Dave wo2x On Aug 3, 2021, at 6:32 AM, Warren Merkel <hullspeed21@...> wrote: |
Re: Changing font color by value of msg.payload
There is no direct API for sending data to the Maestro - exactly. It has to be accomplished via another path - via the Radio server itself. I have this in my work-in-progress list and is only in "proof-of-concept" status.
toggle quoted message
Show quoted text
It is part of another interesting application, when finished, will allow a KPA500/KPA1500 to partially emulate a PGXL for display purposes. That project has been stalled lately, as I'm busy finalizing another larger and exciting, Ham radio / Node-Red team project which is nearing completion. The RIB is going Node-Red. Warren, KD4Z On 8/3/2021 12:17 AM, Charlie Rubenstein wrote:
I wonder if there is an API for sending data to the Maestro.....would really like to send PA output power and SWR to its screen. |
Re: Changing font color by value of msg.payload
Charlie Contact?me off-line.? We can build a "toggle" operate/standby button for your?amplifier, together, via Team View. Alan On Mon, Aug 2, 2021 at 11:27 PM Charlie Rubenstein <charlier@...> wrote: BTW, Dave......I've been using the Elecraft utilities to run the KPA500/KAT500 set for a while, but decided I prefer the dashboard on NR. (Acutally was sorta QRT for? while taking care of some medical issues and my 92 yr old mom). |
Re: Scheduling A Node Red Zoom Trainng Session?
Dave ( & Rusty)
toggle quoted message
Show quoted text
Even though I don't have a Flex ( I am currently running a Kenwood TS890)? I am led to believe that much of the Kenwood serial command structure is very similar. I would like to at least sit on on the zoom call if possible,. Rather than try and juggle multiple schedules I'll just try and tag along on what ever you guys decide. I am retired with few outside? commitments. I am in the Floridian same time zone a Dave WO2X Dave NR1DX On 8/2/2021 11:55 PM, David De Coons wo2x wrote:
Hi Rusty,-- Dave Manuals@... www.ArtekManuals.com --
This email has been checked for viruses by Avast antivirus software. |
Re: Scheduling A Node Red Zoom Trainng Session?
RUSS GUIDRY K5OA
toggle quoted message
Show quoted text
On Aug 2, 2021, at 20:55, David De Coons wo2x <RocketNJ@...> wrote:
|
Re: Changing font color by value of msg.payload
Oh.....RUB IT IN...hi hi. I'm very happy with my little KPA500. It really has enhanced ham radio for me. All those Asian countries that had been out of reach are now in the log. Just about to cross the 200 DXCC mark. Very pleased with the station. No big yagi or tower here, just a EFHW up 50'. When I first installed the amp, I was having some RFI issues, but with some tweaks to the feedline length and a LPF, it's pretty much gone.?
I wonder if there is an API for sending data to the Maestro.....would really like to send PA output power and SWR to its screen. 73 de Charlie KB8CR |