开云体育

Thanks Warren, I spent the day in the emergency room yesterday for a cardiac issue so trying to relax today. I am much better. I just uploaded v6 of the VITA49 and FlexRadio flows (zipped file). I did

David, Just getting first of your Flows going. Had trouble getting node-ping and bool-gate dependencies resolved. They don't want to show up in the Pallette search. I manually installed them and got

Ok I will upload version 6 in a bit :-). That’s what happens when I don’t have a first gen 6000 series to test with. Dave wo2x Sent from my waxed string and tin cans.

works A-OKAY now I think Thanks a lot Bret WX7Y wrote:

I bought a CanaKit Pi4 kit. The power supply that came with it is quiet as a mouse! 73, Ed KA9EES Sent: Monday, February 01, 2021 1:56 PM To: [email protected] Subject: [nodered-hamradio]

Hi Bret, I just emailed you another version to test. Let me know 73 Dave wo2x Sent: Monday, February 1, 2021 3:03 PM To: [email protected] Subject: Re: [nodered-hamradio] File /wo2x

If you use a 12 to 5 dc converter, you are just replacing the wall wart with one in different packaging. What value does that add? Also, none of the small 12 to 5 dc converter modules on ebay or

Look on Amazon and they have some quite RF noise wise 12-24v input 5V buck boost power converters though these are a type of switching supply You can buy these at different output currents and I would

Just tried the Brand NEW FlexRadiv5 flows and it does NOT work on the 6700, it is the same as it was with the Broken FAN and no temp thought you would like to know Bret WX7Y [email protected]> wrote:

The following files have been uploaded to the Files area of the [email protected] group. * /wo2x flows/Vita49_FlexRadiv5_Flows.zip ( /g/nodered-hamradio/files/wo2x

Ok great! No need to do anything then. 73 Dave wo2x Sent from my waxed string and tin cans.

Dave, I hope things go well! On my dashboard the meters zero fine when i turn off the amp. ?Also the amp will both turn off and on remotely using the node red dashboard. Take care, Stan, K3PW

You’re welcome! Glad it is working. I am going to look at K6HN’s KPA500 flow either tomorrow or Tuesday to zero the meters. I’m currently sitting in the hospital but hope to get released today.

Thanks, Dave. Great video and Wiki beginner’s guide. ?Both have been very helpful getting me up to speed. ?Yesterday I used the Wiki to get the software installed and today I’ve downloaded and

The difference is how the KPA500 and 1500 power off. I have to see how the 500 does it as that is the trigger to zero the meters. I will not be able to get to this until the earliest tomorrow. I am

I bet whatever you did with the KPA1500 will transfer well to the KPA500 too. Charlie KB8CR

One other thing I added to my KPA1500 flow is when you click the off button the amp does not shut off until the temperature drops to 38c or lower. This allows me to shut down the amp without waiting

I do not have a KPA500 to test with. I can try to update an existing flow with the same “logic” I used on the KPA1500. Dave

Sounds great Dave....I spent 2 hours today watching the YouTube video. It was great. Are you gonna be updating the KPA500 / KAT500 flow too? That's what I'm getting. Charlie KB8CR

You’re welcome. Please read the comment nodes in the flows by double clicking them to read comments. The VITA49 flow needs the ping node changed to the IP of your radio. That is the node that says