开云体育

Hi Warren.? Thanks so much for taking the time to respond to my query and creating the example flow.? I have attempted to get it working in my environment but have not been successful.? I can

Ken, How about a combination of Alan's options 2 and 3 above? 2- send images for the desired button via node-red.? This is the method Dave, WO2X demonstrated 3- send SVG formatted?commands - ?Most

Ken From your description, I would agree, using Dave's approach to send the image of the button from Node-Red, based on the antenna logic, would be best. Using the WSProxy MultiState process is best

Hi Alan.? Thanks for your thorough response and examples.? I've been able to use the WSMultiState button as you suggested.? I need to go a little further as I need to change the state of say all

Attached is a more advanced "WSProxy Multistate" button flow to demonstrate configuring button graphics and to command the button state from Node-Red. First, build your button icon using your favorite

Ken There are three ways to do dynamic buttons, easy to more advanced, in order: 1- use the WSProxy MultiState StreamDeck Custom Plugin - easy and more below. 2- send images for the desired button via

Since the Zoom meeting hosted by Ron a few weeks ago, I've purchased a Stream Deck and had fun modifying several of my flows to use it with both the WS proxy and FRStack plugins.? So far, I have

Are you looking at node red ? I have FRstack running on the pi 73 de HA8RD

Check in FR Stack under the PGXL tab. I had some issues like this a long time ago and that's where my problem was. 73 de W7IB

Walter, K5WH told me that Flex had indicated to him new firmware that would allow addressing multiple radios by IP address rather than just UDP broadcasts. Don't know much other than that, but sure

Hello! Is there anything to do with the Node red server raspberry PI running FRstack and PGXL , sometimes it holds back the drive on the radio and does not go out max gain. How can i check or adjust

Rag The flow you ask about is in the files section of this IO group. Alan. WA9WUD

Hello Is there some place where you share/save projects?? Or only randomly?? Best Regards, Stein-Roar Zamora Brobakken post@... LB3RE K3RAG LC0X Skype: lb3re.rag 3. mars 2025 kl. 23:20 skrev Ken

Hi again Alan.? I wanted to thank you again for your guidance on this project.? I have successfully generated several maps using? NS6T's site and incorporating them into my multiple map rotor

I'm all set now. I downloaded Great Circle Mapper and built a new World map that I absolutely love. Now I just wish I could figure out how to make a USA grid map that has the rotor headings, but is

Patrick and others who what "dynamic" SVG maps. In the demo, "build your own rotor map" flow, there is a section for dynamic maps. ?For your maps, you need to modify the function(s) below for each of

Patrick Well done. Alan

Now we're cooking! Thanks for that Alan. Took a minute to figure out how to enable the 3rd beam, but I got it all sorted. Now if someone could make me the world and NA map from my QTH (W7IB in CN88uw)

I had not seen that. This might be what I need to get this started. I'll work on it and keep you updated. Thank you Alan. 73

I am thinking what Patrick wants can be done with Modifying the SVG code to add a third vector, with different color then in the code set them to fixed values (azimuth). You just need the node in the