Re: Dashboard Missing fron Newbie
Marty, try "/ui" lower case instead of upper case. Unix anything is case sensitive. I just tried upper case in my RPi Node Red server and get no response.?
BTW, one point on clarification, you say your server is running on 127.0.0.1. That is a bit nonsensical. 127.0.0.1 is the IP looback (my IPl address and when one establishes an ip connection to it, it connects to the currect node. So, in effect, every IP node is 127.0.0.1.
Hello to the group.
Name is Marty call W8AKS in Beckley Wv.
I got bit bigtime by Kyle AA0Z the other day. I had a pi4 on the shelf so said Let’s try something new.
After watching Kyle’s video, I proceeded to get my feet wet after updating the Pi4.
This is what I’ve done and the bump I’ve came too.
I have Node Red up and running on the pi4.I bring up node red via the programming tab on the dropdown menu.
I get a terminal window pop up with a some work I have to do involving encrypted files.
Bottom line, node red console running in server at
I go to chrome and use the following url for my workspace
This brings up my workspace.
I followed wo2x pdf instructions in the files section and installed the required modules.
Now is where I hit the bump in the road.
Following kyles guidance and the node red web site. I tried to bring up a dashboard so I could start the learning process.
I used
No dashboard but a error message that 254 is a private thing in the router.
This is true. I am running fiber from Frontier using their modem and Router as it gives 1 gig performance.
This is the point I am at, how do I work around this to get a dashboard?
I’ve checked the dashboard in the palette section with no joy.
Any help be greatly appreciated.
Thanks and 73
Marty Bluhm
W8AKS
|
Re: Dashboard Missing fron Newbie
I am playing FT8 on 20. NJ2BC
On Sat, Jun 25, 2022, 7:38 PM Marty Bluhm < w8aks55@...> wrote: ?That sounds good. I really didn’t expect anything due to field day. In fact, I have the all nite shift on the cw station so I’ll have to go in a couple hrs. That”s if the the current underway tstorms stop.? Have fun and talk with you later. 73 On Jun 25, 2022, at 7:29 PM, David De Coons wo2x <RocketNJ@...> wrote:
? Hi? Marty
At Field Day today and tomorrow but can help you remotely Monday if you still need help.
73 Dave wo2x On Sat, Jun 25, 2022, 7:26 PM Marty Bluhm < w8aks55@...> wrote: Hi Dave,
Thanks for the super fast reply.
I downloaded and installed all those flows you recommended in the files section. A dashboard was among them and is present on the left side (palette) of the workspace. In fact it is the second to last item followed by Raspberry Pi.
I have been working with this to see if I could solve my own problem but no luck.
When I click on it, the slider moves up between the json and xml flows with nothing resembling a dashboard workspace showing.
Perhaps I’m looking for the wrong thing.
Thanks , hopefully can solve this and get on with the goodies.
73
Marty
W8AKS
> On Jun 25, 2022, at 19:08, David De Coons wo2x <RocketNJ@...> wrote:
>
> ?Hi Marty
>
> You might not be able to access the dashboard u til you load a flow containing dashboard nodes.
>
> Also make sure you have the node-red-dashboard node loaded.
>
> 73
> Dave wo2x
>
>
> Sent from my waxed string and tin cans.
>
>> On Jun 25, 2022, at 7:06 PM, Marty Bluhm <w8aks55@...> wrote:
>>
>> ?Hello to the group.
>> Name is Marty call W8AKS in Beckley Wv.
>> I got bit bigtime by Kyle AA0Z the other day. I had a pi4 on the shelf so said Let’s try something new.
>> After watching Kyle’s video, I proceeded to get my feet wet after updating the Pi4.
>> This is what I’ve done and the bump I’ve came too.
>>
>> I have Node Red up and running on the pi4.I bring up node red via the programming tab on the dropdown menu.
>> I get a terminal window pop up with a some work I have to do involving encrypted files.
>> Bottom line, node red console running in server at
>> I go to chrome and use the following url for my workspace
>>
>>
>> This brings up my workspace.
>> I followed wo2x pdf instructions in the files section and installed the required modules.
>>
>> Now is where I hit the bump in the road.
>> Following kyles guidance and the node red web site. I tried to bring up a dashboard so I could start the learning process.
>> I used
>> No dashboard but a error message that 254 is a private thing in the router.
>> This is true. I am running fiber from Frontier using their modem and Router as it gives 1 gig performance.
>> This is the point I am at, how do I work around this to get a dashboard?
>> I’ve checked the dashboard in the palette section with no joy.
>> Any help be greatly appreciated.
>> Thanks and 73
>> Marty Bluhm
>> W8AKS
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
|
Re: Dashboard Missing fron Newbie
? That sounds good. I really didn’t expect anything due to field day. In fact, I have the all nite shift on the cw station so I’ll have to go in a couple hrs. That”s if the the current underway tstorms stop.? Have fun and talk with you later. 73
toggle quoted message
Show quoted text
On Jun 25, 2022, at 7:29 PM, David De Coons wo2x <RocketNJ@...> wrote:
? Hi? Marty
At Field Day today and tomorrow but can help you remotely Monday if you still need help.
73 Dave wo2x On Sat, Jun 25, 2022, 7:26 PM Marty Bluhm < w8aks55@...> wrote: Hi Dave,
Thanks for the super fast reply.
I downloaded and installed all those flows you recommended in the files section. A dashboard was among them and is present on the left side (palette) of the workspace. In fact it is the second to last item followed by Raspberry Pi.
I have been working with this to see if I could solve my own problem but no luck.
When I click on it, the slider moves up between the json and xml flows with nothing resembling a dashboard workspace showing.
Perhaps I’m looking for the wrong thing.
Thanks , hopefully can solve this and get on with the goodies.
73
Marty
W8AKS
> On Jun 25, 2022, at 19:08, David De Coons wo2x <RocketNJ@...> wrote:
>
> ?Hi Marty
>
> You might not be able to access the dashboard u til you load a flow containing dashboard nodes.
>
> Also make sure you have the node-red-dashboard node loaded.
>
> 73
> Dave wo2x
>
>
> Sent from my waxed string and tin cans.
>
>> On Jun 25, 2022, at 7:06 PM, Marty Bluhm <w8aks55@...> wrote:
>>
>> ?Hello to the group.
>> Name is Marty call W8AKS in Beckley Wv.
>> I got bit bigtime by Kyle AA0Z the other day. I had a pi4 on the shelf so said Let’s try something new.
>> After watching Kyle’s video, I proceeded to get my feet wet after updating the Pi4.
>> This is what I’ve done and the bump I’ve came too.
>>
>> I have Node Red up and running on the pi4.I bring up node red via the programming tab on the dropdown menu.
>> I get a terminal window pop up with a some work I have to do involving encrypted files.
>> Bottom line, node red console running in server at
>> I go to chrome and use the following url for my workspace
>>
>>
>> This brings up my workspace.
>> I followed wo2x pdf instructions in the files section and installed the required modules.
>>
>> Now is where I hit the bump in the road.
>> Following kyles guidance and the node red web site. I tried to bring up a dashboard so I could start the learning process.
>> I used
>> No dashboard but a error message that 254 is a private thing in the router.
>> This is true. I am running fiber from Frontier using their modem and Router as it gives 1 gig performance.
>> This is the point I am at, how do I work around this to get a dashboard?
>> I’ve checked the dashboard in the palette section with no joy.
>> Any help be greatly appreciated.
>> Thanks and 73
>> Marty Bluhm
>> W8AKS
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
|
Re: Dashboard Missing fron Newbie
Hi? Marty
At Field Day today and tomorrow but can help you remotely Monday if you still need help.
73 Dave wo2x
On Sat, Jun 25, 2022, 7:26 PM Marty Bluhm < w8aks55@...> wrote: Hi Dave,
Thanks for the super fast reply.
I downloaded and installed all those flows you recommended in the files section. A dashboard was among them and is present on the left side (palette) of the workspace. In fact it is the second to last item followed by Raspberry Pi.
I have been working with this to see if I could solve my own problem but no luck.
When I click on it, the slider moves up between the json and xml flows with nothing resembling a dashboard workspace showing.
Perhaps I’m looking for the wrong thing.
Thanks , hopefully can solve this and get on with the goodies.
73
Marty
W8AKS
> On Jun 25, 2022, at 19:08, David De Coons wo2x <RocketNJ@...> wrote:
>
> ?Hi Marty
>
> You might not be able to access the dashboard u til you load a flow containing dashboard nodes.
>
> Also make sure you have the node-red-dashboard node loaded.
>
> 73
> Dave wo2x
>
>
> Sent from my waxed string and tin cans.
>
>> On Jun 25, 2022, at 7:06 PM, Marty Bluhm <w8aks55@...> wrote:
>>
>> ?Hello to the group.
>> Name is Marty call W8AKS in Beckley Wv.
>> I got bit bigtime by Kyle AA0Z the other day. I had a pi4 on the shelf so said Let’s try something new.
>> After watching Kyle’s video, I proceeded to get my feet wet after updating the Pi4.
>> This is what I’ve done and the bump I’ve came too.
>>
>> I have Node Red up and running on the pi4.I bring up node red via the programming tab on the dropdown menu.
>> I get a terminal window pop up with a some work I have to do involving encrypted files.
>> Bottom line, node red console running in server at
>> I go to chrome and use the following url for my workspace
>>
>>
>> This brings up my workspace.
>> I followed wo2x pdf instructions in the files section and installed the required modules.
>>
>> Now is where I hit the bump in the road.
>> Following kyles guidance and the node red web site. I tried to bring up a dashboard so I could start the learning process.
>> I used
>> No dashboard but a error message that 254 is a private thing in the router.
>> This is true. I am running fiber from Frontier using their modem and Router as it gives 1 gig performance.
>> This is the point I am at, how do I work around this to get a dashboard?
>> I’ve checked the dashboard in the palette section with no joy.
>> Any help be greatly appreciated.
>> Thanks and 73
>> Marty Bluhm
>> W8AKS
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
|
Re: Dashboard Missing fron Newbie
Hi Dave,
Thanks for the super fast reply.
I downloaded and installed all those flows you recommended in the files section. A dashboard was among them and is present on the left side (palette) of the workspace. In fact it is the second to last item followed by Raspberry Pi.
I have been working with this to see if I could solve my own problem but no luck.
When I click on it, the slider moves up between the json and xml flows with nothing resembling a dashboard workspace showing.
Perhaps I’m looking for the wrong thing.
Thanks , hopefully can solve this and get on with the goodies.
73
Marty
W8AKS
toggle quoted message
Show quoted text
On Jun 25, 2022, at 19:08, David De Coons wo2x <RocketNJ@...> wrote:
?Hi Marty
You might not be able to access the dashboard u til you load a flow containing dashboard nodes.
Also make sure you have the node-red-dashboard node loaded.
73
Dave wo2x
Sent from my waxed string and tin cans.
On Jun 25, 2022, at 7:06 PM, Marty Bluhm <w8aks55@...> wrote:
?Hello to the group.
Name is Marty call W8AKS in Beckley Wv.
I got bit bigtime by Kyle AA0Z the other day. I had a pi4 on the shelf so said Let’s try something new.
After watching Kyle’s video, I proceeded to get my feet wet after updating the Pi4.
This is what I’ve done and the bump I’ve came too.
I have Node Red up and running on the pi4.I bring up node red via the programming tab on the dropdown menu.
I get a terminal window pop up with a some work I have to do involving encrypted files.
Bottom line, node red console running in server at
I go to chrome and use the following url for my workspace
192.168.254.144:1880
This brings up my workspace.
I followed wo2x pdf instructions in the files section and installed the required modules.
Now is where I hit the bump in the road.
Following kyles guidance and the node red web site. I tried to bring up a dashboard so I could start the learning process.
I used 192.168.254.144:1880/UI
No dashboard but a error message that 254 is a private thing in the router.
This is true. I am running fiber from Frontier using their modem and Router as it gives 1 gig performance.
This is the point I am at, how do I work around this to get a dashboard?
I’ve checked the dashboard in the palette section with no joy.
Any help be greatly appreciated.
Thanks and 73
Marty Bluhm
W8AKS
|
Re: Dashboard Missing fron Newbie
Hi Marty
You might not be able to access the dashboard u til you load a flow containing dashboard nodes.
Also make sure you have the node-red-dashboard node loaded.
73
Dave wo2x
Sent from my waxed string and tin cans.
toggle quoted message
Show quoted text
On Jun 25, 2022, at 7:06 PM, Marty Bluhm <w8aks55@...> wrote:
?Hello to the group.
Name is Marty call W8AKS in Beckley Wv.
I got bit bigtime by Kyle AA0Z the other day. I had a pi4 on the shelf so said Let’s try something new.
After watching Kyle’s video, I proceeded to get my feet wet after updating the Pi4.
This is what I’ve done and the bump I’ve came too.
I have Node Red up and running on the pi4.I bring up node red via the programming tab on the dropdown menu.
I get a terminal window pop up with a some work I have to do involving encrypted files.
Bottom line, node red console running in server at
I go to chrome and use the following url for my workspace
192.168.254.144:1880
This brings up my workspace.
I followed wo2x pdf instructions in the files section and installed the required modules.
Now is where I hit the bump in the road.
Following kyles guidance and the node red web site. I tried to bring up a dashboard so I could start the learning process.
I used 192.168.254.144:1880/UI
No dashboard but a error message that 254 is a private thing in the router.
This is true. I am running fiber from Frontier using their modem and Router as it gives 1 gig performance.
This is the point I am at, how do I work around this to get a dashboard?
I’ve checked the dashboard in the palette section with no joy.
Any help be greatly appreciated.
Thanks and 73
Marty Bluhm
W8AKS
|
Dashboard Missing fron Newbie
Hello to the group.
Name is Marty call W8AKS in Beckley Wv.
I got bit bigtime by Kyle AA0Z the other day. I had a pi4 on the shelf so said Let’s try something new.
After watching Kyle’s video, I proceeded to get my feet wet after updating the Pi4.
This is what I’ve done and the bump I’ve came too.
I have Node Red up and running on the pi4.I bring up node red via the programming tab on the dropdown menu.
I get a terminal window pop up with a some work I have to do involving encrypted files.
Bottom line, node red console running in server at
I go to chrome and use the following url for my workspace
192.168.254.144:1880
This brings up my workspace.
I followed wo2x pdf instructions in the files section and installed the required modules.
Now is where I hit the bump in the road.
Following kyles guidance and the node red web site. I tried to bring up a dashboard so I could start the learning process.
I used 192.168.254.144:1880/UI
No dashboard but a error message that 254 is a private thing in the router.
This is true. I am running fiber from Frontier using their modem and Router as it gives 1 gig performance.
This is the point I am at, how do I work around this to get a dashboard?
I’ve checked the dashboard in the palette section with no joy.
Any help be greatly appreciated.
Thanks and 73
Marty Bluhm
W8AKS
|
Re: Stream Deck and Node Red - which model?
The Mk2 is just a newer version and I believe it uses a USB-C interface on the Stream Deck end. Operationally, there is no difference.
Let us know if you have any questions when implementing it. In the file section I have a zip file with my flows and files needed for Stream Deck integration, including the plug-ins and a profile for Stream Deck.?
Have fun!
toggle quoted message
Show quoted text
On Jun 24, 2022, at 7:56 PM, georgejones@... wrote:
?Looking to integrate Stream Deck into my system using node-red and some of the great ideas I see here.? ?Amazon has two 15 key versions on their site, Stream Deck and Stream Deck MK.2.? Which is the correct model, or does it matter?
Thanks.
73
George Jones
k7grj
|
Re: Stream Deck and Node Red - which model?
Looking to integrate Stream Deck into my system using node-red and some of the great ideas I see here.? ?Amazon has two 15 key versions on their site, Stream Deck and Stream Deck MK.2.? Which is the correct model, or does it matter?
Thanks.
73
George Jones
k7grj
|
Re: Need Your Dashboard Screen Shots!
Looks like he is using SVG graphics. Really nice and opens up a whole bunch of ideas.?
Tormod has done excellent work with SVG node. I’ve used his code and ideas here. I took a slightly different route with sending graphics to the Stream Deck buttons but if it weren’t for Tornod’s work I never would have come up with it.?
73 Dave wo2x Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jun 24, 2022, at 1:00 AM, K6HN Gary <gary@...> wrote:
?Hi Tormod,
Love the images displayed in the Flexradios section! I had never thought about doing something like that. Is your flow code available in the files section?
--
Gary
K6HN
|
Re: Need Your Dashboard Screen Shots!
Hi Tormod,
Love the images displayed in the Flexradios section! I had never thought about doing something like that. Is your flow code available in the files section?
--
Gary
K6HN
|
Re: Question about how to "zero" meter data when radio connection is dropped
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Mike Pate - K5MAP Sent: Thursday, June 23, 2022 12:13 AM To: [email protected]Subject: [nodered-hamradio] Question about how to "zero" meter data when radio connection is dropped ? All,
I've built a flow (see pic attached) which displays the meter data (i.e. Input Voltage, PA Voltage, etc.) but earlier today I noticed that when I shut down my 6600M, the meter data stayed at the latest value.? Does anyone have any suggestions on how I can update my flow so when the connection to the radio is lost, the 4 meter data shows 0 (zero)?
--
Mike / K5MAP
|
Re: Need Your Dashboard Screen Shots!
|
Re: Need Your Dashboard Screen Shots!
It appears Ed’s Antenna and mode info is from an HF Auto??
toggle quoted message
Show quoted text
On Jun 22, 2022, at 11:33 PM, Walter Holmes K5WH <walterh@...> wrote:
? Ed, ? How are you able to get that detail from the MercuryIIIs? ? That’s something I’m looking for as well. ? Thanks, ? ?
--
73,
Ed KA9EES
|
Question about how to "zero" meter data when radio connection is dropped
All,
I've built a flow (see pic attached) which displays the meter data (i.e. Input Voltage, PA Voltage, etc.) but earlier today I noticed that when I shut down my 6600M, the meter data stayed at the latest value.? Does anyone have any suggestions on how I can update my flow so when the connection to the radio is lost, the 4 meter data shows 0 (zero)?
--
Mike / K5MAP
|
Re: Need Your Dashboard Screen Shots!
Ed, ? How are you able to get that detail from the MercuryIIIs? ? That’s something I’m looking for as well. ? Thanks, ?
toggle quoted message
Show quoted text
|
Re: Need Your Dashboard Screen Shots!
Dave, Yes N1MM+ is feeding the data into the flow. I setup the master station to send the contacts up to the cloud based NR instance.  It is running on free tier ARM Oracle cloud instance, with NGINX as the front end, and has a 'free' SSL.?? But you could easily run as a normal node locally.?? The flow is attached. 73, Dana NN0G?
|
Re: Need Your Dashboard Screen Shots!
I must say that many (most) of these are very impressive! I've just done a few experiments with Node-Red - clearly I need to look more seriously at it!
A question - several of these dashboards include spectrum scopes - how are these displayed? I use an SDRPlay RSP1A together with my FTdx101D and FT-991A - do the interfaces exist to allow me to display the spectrum from the RSP1A?
Martin (G8FXC)
|
Re: Need Your Dashboard Screen Shots!
Hi Dana.?
Are you using N1MM+??
If so, can you forward the “stupid flow”? ;-)
I’d like to use it this weekend. I was asked to help a group with Field Day who are relatively new to Field Day and it would be fun to have people be able to see the dashboard. We’re running 2F from a County Mobile Command Post (modified bus with hydraulic slide outs). Real nice and air conditioned!
My station will be my 6600m with an Inrad DMS629 desk mic. The second station is probably going to be a Yaesu FTdx-1200 (ughh).?
73 Dave wo2x Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jun 22, 2022, at 12:07 PM, Dana NN0G <dgertsch@...> wrote:
?Here is our stupid simple FD dashboard.  73, Dana NN0G?
|
Re: Need Your Dashboard Screen Shots!
Here is our stupid simple FD dashboard.  73, Dana NN0G?
|
Dave wo2x
Mike Pate - K5MAP
Walter Holmes K5WH