开云体育

Hi Ken Thanks for joining the Node Red group. I hope you are enjoying retirement! I use a Digital Loggers Web Switch Pro which has 10 AC outlets, 8 which are individually switchable. There are already

I am a complete node red noob. What would be the best way to use these relays to switch power supplies, computer, etc? Are there any ready-made cables for the relay i/o pins that would be AC

Hi Mike, Sequent have published some NR information at https://github.com/SequentMicrosystems/8relay-rpi/tree/master/node-red. That should help! I'm am still watching "new guy" node-red you tube

Mike Use one relay for rem on/off by monitoring weather. 73, Marty WD9GYM

Steve, I received my relay board today. Should have something the weekend. I'm thinking of interface for remote antenna switch. - I have a RCS-8V,antenna switch.? Although it has 5 ports, I don't

Dave Thanks for the photos. I see where you have some overhead in both photos. I operate off a laptop and more get just have to eat some kitchen tabletop space and start using a monitor for a second

John That means you need to add a needed node to the Pallete Look for the name of the missing node. I would guess you need the: "ui_button" and "exec" nodes. Then on the right side of the flow page

Did you follow the instructions in the WiKi for installing .Net and FRStack? Maybe you missed a step? /g/nodered-hamradio/wiki/22502 73 Dave wo2x Sent: Sunday, August 16, 2020 8:11 PM

Alan WA9WUD, I tried to add your FRS Control&Status.json just now and received an error message. (Unknown node)? Any direction you can offer? Thanks, 73 John W9KXQ wrote:

Something is wrong. Even though it appears to be working I will take your advice and start over with a fresh install. I did have several hiccups during the install process. Thanks for your advice.

Gary For comparison, here are screenshots of my FRS Status in each of the three states: Alan [image: Screen Shot 2020-08-16 at 7.42.55 PM.png] [image: Screen Shot 2020-08-16 at 7.42.47 PM.png] [image:

Hi Marty On my iPad which I use for remote operating I use split mode which puts SmartSDR for IOS on the right and Safari browser on the left. I just bought a 32” monitor which I have to the left of

It seems odd as everything seems to work correctly. I am getting this error a lot. dotnet[7512]: FRStackWebApi.Controllers.ActiveSliceController[0] 15:41:57 RangeCheck true is not between 0 and 100.

I have seen a few photos of desktops showing the node-red dashboard in a rectangular shape along side SmartSDR’s display of the radio.? How is this accomplished? My node-red service is on a

Gary. No, I do not. Does not look like your install was fully completed. Suggest you try building a fresh FRS Server from the ground up, including a fresh .Net build. Alan

It's not an audio recorder, but an audio "player". I stream my radio audio to a shoutcast server which then allows me to use an audio player to listen to the radio stream. The player in the node-red

Hi Alan, Thanks for sharing this, I would not have thought of about monitoring the service. Any idea why I am getting this error when trying to stop or start the service?

Here is a screenshot of my FRStack Status and Control Mode. The dashboard shows; 1- The full text of the FRS Service Status 2- A text box showing only the "active", inactive" or "Activating" state 3-

The following files have been uploaded to the Files area of the [email protected] group. * /FRS Control&Status.json ( /g/nodered-hamradio/files/FRS Control&Status.json )

Gary, well done. I would be interested in learning more about your audio recorder. I would like to use one on my Satellite Dashboard. Alan WA9WUD.