Re: File /!1! Flows by Type/SVG Based Flows/Tuner Sweep.json uploaded #file-notice
¿ªÔÆÌåÓýWe¡¯re getting it working under various conditions such as TX Ant 1 or 2 on radio (port A or B on TG XL) and show colors to indicate if tuner in circuit or bypassed for each tune point.?Once done then will start looking into adding colors to indicate a failed or high SWR tune and then if it make sense to sequence thru each band automatically.? I think the second condition above will not be included since every installation is unique (number of antennas in total, number of antennas per band, etc). So it will be up to each person to select the band and antenna before starting.? For example if you have two antennas for 20 meters, you can make sure the first antenna is selected, run to sweep/auto tune, then select second antenna and run it again.? Alan has put a lot of work into this and it is something that can help take the guesswork out of selecting different start and end frequencies per band and default number of tune memories. You will have the ability to manually set start and end frequencies and number of memories. You don¡¯t need ten memories for 12 meters.? 73 Dave wo2x Sent from my waxed string and tin cans.? On Jul 7, 2022, at 4:08 PM, Alan Blind, WA9WUD <a.alan.blind@...> wrote:
|
Dave wo2x