开云体育

have an H4 nano that has been working just fine with my W10 x64 for the
last couple of years. Then one day a week ago it will nolonger connect to
saver. It attempts to connect 10 times then quits.

I then used another laptop using W10 x64 and it does the same thing.

So then i pulled my original 2.8 nano out which has not been used for many
years and no updates to it. It connects and works and it works just fine
on both laptops.

One more note about my H4. It works on a unix os.

So where in rhe problem?

I plan on upgrading my H4 tomorrow to the latest code. Can someone please
point me to the correct download address for the latest H4 upgrade?

Thanks for your help.

Fred
N4CLA

On Tue, Jul 11, 2023 at 08:06 PM, Fred Moore wrote:

Can someone please
point me to the correct download address for the latest H4 upgrade?

Fred,

DiSlord provides the latest firmware versions:


Martin

So where do you think the problem is

The last Application from DiSlord included in his 1.2.24 Firmware...

Thanks for the info. Question. I went to the site you referenced and saw
2 references to 1.2.24. Are these just updates to 1.2.24 or are they
complete installs? because I looked at the two 1.2.24 references and they
were each a different size.

Is 1.2.24 available on GitHub?

Fred

My current level of code on my NanoVNA is 1.0.64 .

Built in the exe...

There is a two dfu files in the source;

- one for NanoVNA-H other for H4...

Good evening Istvan. I think that both of those numbers 1,2,24 for the H
and the H4 are code levels for the basic operation of the NanoVNA and are
not relevant to the NanoVNA-exe. NanoVNA-EXE is a program that runs on
your computer like NanoVNA-saver. Both of those applications use the
NanoVNA data and present that data on a larger screen, your computer
screen..

I hope I explained that well enough without going into more detail.

Fred

This two files are the last Firmware for NanoVna Devices, two types; for H or H4.

Yo can use with other programs or applications If You want for upgrade the VNAs Firmware... (STM32Cube Programmer or Android app...)
I just realize now; that Fws are available seperetly too...

If You download only the DiSlord-application "exe" You dont have the seperated files, but also can You make a upgrade; because DiSlord integrated his Firmwares inside the app. (easy way)

Your question was not clear for me "Are these just updates to 1.2.24 or are they
complete installs?" - these are complete Firmwares.
- We were talking about FW when I recommended the application... - nice :)
- I hope it's understandable