¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Nanovna-Users
  2. Topics

Case for the Nano VNA

 

My first 3D printing project.Any suggestions for a the file to print a good case for the Nano??
Kent
 

Do a search on Thingiverse for Nanovna - there are several designs to play with


On Sun., 3 Oct. 2021 at 9:11 p.m., KENT BRITAIN<WA5VJB@...> wrote: My first 3D printing project.Any suggestions for a the file to print a good case for the Nano??
Kent
 

Several cases on thingiverse.com
 

Mine came from thingiverse. I love it.

On Sun, Oct 3, 2021, 11:01 PM Larry Rothman <nlroth@...> wrote:

Do a search on Thingiverse for Nanovna - there are several designs to play
with


On Sun., 3 Oct. 2021 at 9:11 p.m., KENT BRITAIN<WA5VJB@...>
wrote: My first 3D printing project.Any suggestions for a the file to
print a good case for the Nano??
Kent











PXL_20211004_035055216.jpg

William Smith
 

I've had mixed luck with depending on the fit of the cover.

I can't find the one that was similar to that but included a cover. I ended up trimming off the storage compartment in my slicer, and it works much better.

73, Willie N1JBJ

On Oct 3, 2021, at 9:11 PM, KENT BRITAIN <WA5VJB@...> wrote:

My first 3D printing project.Any suggestions for a the file to print a good case for the Nano??
Kent
 

I create this case for my 4 inch nanoVNA v2:


it contain stick holder, and box for calibration kit, not big.
 

On Mon, Oct 4, 2021 at 10:01 AM, OiBoy The Pissed off Punk wrote:


Mine came from thingiverse. I love it.
Your radios/equipment might look good if cleaned ;)
Wes KN4NPH
 

Kent,
Here is a case I designed for my Nano. It uses Neo magnets to hold the
accessories cover in place. The VNA is basically wedged (comfortably) in
the opening.
I use a 6" SMA to BNC coax cable from CablesOnline, to take the strain off
the VNA's connectors. The blocks 'pinch' the cable jacket to keep it from
moving. The blocks are glued; E6000, that can be removed if necessary.
I only use Channel 0. This may give you some ideas. Check my dimensions
against your VNA. YMMV

Wes KN4NPH

On Wed, Oct 6, 2021 at 4:14 AM OneOfEleven <cmoss296@...> wrote:

On Mon, Oct 4, 2021 at 10:01 AM, OiBoy The Pissed off Punk wrote:


Mine came from thingiverse. I love it.
Your radios/equipment might look good if cleaned ;)





NanoVNA Case w-cable blocks.JPG
NanoVNA Case w-storage cover.JPG
NanoVNA Case w-VNA.JPG
NanoVNA pt1.jpg
NanoVNA pt2.jpg
nanaVNA Users Gp Case1 cable blocks.stl
nanaVNA Users Gp Case1 cable blocks.stl
nanaVNA Users Gp Case1.stl
nanaVNA Users Gp Case1.stl
nanaVNA Users Gp Case1 Cover.stl
nanaVNA Users Gp Case1 Cover.stl

 

Good thing I don't enter them in beauty contests, I use them.

On Wed, Oct 6, 2021, 5:14 AM OneOfEleven <cmoss296@...> wrote:

On Mon, Oct 4, 2021 at 10:01 AM, OiBoy The Pissed off Punk wrote:


Mine came from thingiverse. I love it.
Your radios/equipment might look good if cleaned ;)

1 - 9 of 9