开云体育

Screen resolution on NANOVNA saver 0.1.4

Wayne Johnson All Messages By This Member #5800 Hi all, I downloaded NANOVNA Saver ver 0.1.4 a day or two ago and the screen resolution appears to have shifted to that what normally installs on earlier versions. 0.1.4 is bigger now and brings about the need to scroll up and down the page. Quite possible that I am doing something stupid but as far as I know the download/install process was the same as with earlier versions. Any help appreciated. Regards all and thanks for all your efforts with this Rune. Wayne VK6EH
Rune Broberg All Messages By This Member #5801 Hi Wayne, I don't remember having added anything that would make the interface bigger. But who knows ;-) I have a number of questions you can answer that might help figure out what's going on: - What operating system are you on? - What is your screen resolution? - What font size is set in the application? (under "Display setup") - How many markers do you have? (3 is the default) - Which charts/plots do you have shown? It's an interesting problem, and I hope I can help you figure it out! -- Rune / 5Q5R toggle quoted message Show quoted text On Sun, 27 Oct 2019 at 00:02, <vk6eh@...> wrote: Hi all, I downloaded NANOVNA Saver ver 0.1.4 a day or two ago and the screen resolution appears to have shifted to that what normally installs on earlier versions. 0.1.4 is bigger now and brings about the need to scroll up and down the page. Quite possible that I am doing something stupid but as far as I know the download/install process was the same as with earlier versions. Any help appreciated. Regards all and thanks for all your efforts with this Rune. Wayne VK6EH
alan victor All Messages By This Member #5802 Hi Rune, I believe I saw a similar issue. If all the markers are all gone, the Smith Chart for example is huge. As you add markers the chart shrinks to a more reasonable size. Further as you add other graphic displays their size scales down to accommodate and all are reasonable in size.
W5DXP #5808 Hi Rune, I have the same condition on my Laptop but not on my Desktop. Laptop highest resolution is 1366x768. Desktop resolution is 1920x1080. Looks like Saver needs more than 768 on the vertical.
Wayne Johnson All Messages By This Member #5882 Hi Rune, Alan and W5DXP are right and I learned it too after some work. In the “Display Settings” window, under “Markers”, I clicked ‘ Remove’ and screen size reduced to the same as the earlier versions were......Problem solved. Thanks all for replying, I only have a summary of replies each morning so only just saw your posts. This simple inexpensive device coupled with Your excellent software Rune make this a major piece of test gear for any amateur station. First Class Thank you. Wayne VK6EH
Rune Broberg All Messages By This Member #5900 Hi Wayne, It's good to hear that you found a workable solution. I would still very much like the answers to the questions I posed above, as I need to figure out why the application size changed, to avoid any further problems. -- Rune / 5Q5R toggle quoted message Show quoted text On Sun, 27 Oct 2019 at 23:40, <vk6eh@...> wrote: Hi Rune, Alan and W5DXP are right and I learned it too after some work. In the “Display Settings” window, under “Markers”, I clicked ‘ Remove’ and screen size reduced to the same as the earlier versions were......Problem solved. Thanks all for replying, I only have a summary of replies each morning so only just saw your posts. This simple inexpensive device coupled with Your excellent software Rune make this a major piece of test gear for any amateur station. First Class Thank you. Wayne VK6EH

Previous Topic Next Topic