Here is an excellent video that shows you how to use a NanoVNA-H/H4 to measure crystal parameters.
Roger
|
You were asking about fw for SYSJOINT and that is their official group. Whatever. Rewrite the firmware from scratch for all we care ?
|
|
|
On 12/4/21 6:35 AM, Ralph Bolt, K?RO via groups.io wrote: I understand how to use the Nano-VNA to measure a crystal's frequency.
Can I use the same configuration to measure the resonant frequency of a parallel capacitor and inductor? yes, and it's a lot easier, because the LC circuit is lower Q, so you don't have to worry about "missing" the resonance with only 101 points.
|
I understand how to use the Nano-VNA to measure a crystal's frequency.
Can I use the same configuration to measure the resonant frequency of a parallel capacitor and inductor?
|
Re: Where to buy a NanoVNA H4 HW rev 4.3?
Am Samstag, 4. Dezember 2021, 15:02:55 CET schrieb Hugen: You can buy NanoVNA-H4 from the zeenko store. NanoVNA-H4 is now sold by
zeenko in version rev4.3.
Thank you for instantaneous response. Erik, DL1ECD
|
Re: Where to buy a NanoVNA H4 HW rev 4.3?
You can buy NanoVNA-H4 from the zeenko store. NanoVNA-H4 is now sold by zeenko in version rev4.3.
It should be noted that the MCU used in the NanoVNA-H4 rev4.3 is the STM32F302CBT6. We have tested that the STM32F302CBT6 has the same RAM and ROM as the STM32F302CCT6.
Since no additional STM32F303 functions are used on the NanoVNA-H4, the STM32F302 and STM303 use on the NanoVNA-H4 are identical.
|
Re: Questions on Dislord v1.0.69 features
I am just finding this info about the V2plus4 and it¡¯s locked down boatloader and fw author not willing to add ability to disable temperature compensation when CW mode is selected.
So is there no hope other than to try and buy a different V2 variant and sell this one ?
|
|
|
In the absence of solutions I have returned to the original Firmware. With it I can manage my NanoVNA from the PC with the usual software (NanoVNA-App, NanoVNA-Sharp, NanoVNA-Server).
Too bad not being able to enjoy the 401 points and manage it at the same time from the PC.
Thank you all.
Antonio - EA7HJ
|
Thank you for the info, Jempi. But is this firmware version the correct
one for my nanoVNA-F (not V2!) by sysjoint?
|
Hi all.
On amazon.co.uk I bought a NanoVNA from AllAboutFun. It had the STM32F302 chip. I contacted the company and in their reply they said
According to your question, we have communicated with the supplier.
This is an open source product, and the STM32F303CCT6 chip is currently out of stock.
We will definitely only use STM32F303CCT6 in the future.
I returned it to amazon and was refunded.
I then bought this one for ?114.18
Nooelec NanoVNA-H 4 Premium Bundle - Vector Network Analyzer Kit from Authorized Distributor with 50kHz-1.5GHz+ Portable VNA (4" LCD), EMI Shielding, Calibration Kit, 6pc Attenuator Kit and Much More!
Brand NooElec
It arrived this morning and I can confirm it has the ST32F303CCT6 chip in it.
I hope this helps UK users.
Colin MM5AGM
|
HI, Pse Check
Latest version 1.0.3 Sep 9-21
Suc6
JP
|
Re: Where to buy a NanoVNA H4 HW rev 4.3?
Hello Erik.
Zeenko's NanoVNA H4 is not a good NanoVNA?
I have a Nanovna but i want to buy an H4.
Regards
¹ó¨¦±ô¾±³æ
toggle quoted message
Show quoted text
El vie., 3 dic. 2021 12:16, Erik <dl1ecd@...> escribi¨®: Looking for an approved vendor Aliexpress (Zeenko Store) without success.
Where to buy a NanoVNA H4 HW rev 4.3?
--
73 de dl1ecd, Erik
|
Where to buy a NanoVNA H4 HW rev 4.3?
Looking for an approved vendor Aliexpress (Zeenko Store) without success.
Where to buy a NanoVNA H4 HW rev 4.3?
--
73 de dl1ecd, Erik
|
Thank you, John, I'll do that!
|
Alex, You might want to ask in the NanoVNA-F group: /g/nanovna-f--John Gord
On Thu, Dec 2, 2021 at 03:51 PM, Dr.Alexander Hahn wrote:
I've got an used NanoVNA-F by sysjoint.
It shows:
Version: Firmware 0.1.5
Frequency: 10k to 1,5GHz
Build time: May 17 2020
etc..
My questions are: Which version have I got and is there a new firmware out for
it?
I've looked at the sysjoint.com page and downloaded the manual, but I see in
the files folder of this group that there are new firmware versions.
Thanks, Alex
|
I've got an used NanoVNA-F by sysjoint.
It shows:
Version: Firmware 0.1.5
Frequency: 10k to 1,5GHz
Build time: May 17 2020
etc..
My questions are: Which version have I got and is there a new firmware out for it?
I've looked at the sysjoint.com page and downloaded the manual, but I see in
the files folder of this group that there are new firmware versions.
Thanks, Alex
|
OK thanks! Got it!
Zack
toggle quoted message
Show quoted text
On Thu, Dec 2, 2021 at 11:34 AM Larry Rothman <nlroth@...> wrote: It's Hugen's release:
On Thursday, December 2, 2021, 12:28:21 p.m. EST, Zack Widup <
w9sz.zack@...> wrote:
Where did you find this firmware? I can't seem to find that version
(20211121) anywhere.
73, Zack W9SZ
On Thu, Dec 2, 2021 at 9:51 AM A. via groups.io <ea7hj@...>
wrote:
I am a rookie in Nanovna but not in electronic and computer skills. I am
45 years old radioamateur.
My problem is that my NanoVNA-H4 with original firmware of 20200221 works
perfectly with all PC applications, but when I update it with the latest
Dislord Nanovna-H4_20211121 firmware, it stops working with PC programs.
I'm using W-10 64 Bits.
It is normal?. Any solution?. Up to what version can I go up without
losing that possibility?
Very grateful in advance.
Antonio - EA7HJ
|
It's Hugen's release:
toggle quoted message
Show quoted text
On Thursday, December 2, 2021, 12:28:21 p.m. EST, Zack Widup <w9sz.zack@...> wrote: Where did you find this firmware? I can't seem to find that version (20211121) anywhere. 73, Zack W9SZ On Thu, Dec 2, 2021 at 9:51 AM A. via groups.io <ea7hj@...> wrote: I am a rookie in Nanovna but not in electronic and computer skills. I am
45 years old radioamateur.
My problem is that my NanoVNA-H4 with original firmware of 20200221 works
perfectly with all PC applications, but when I update it with the latest
Dislord Nanovna-H4_20211121 firmware, it stops working with PC programs.
I'm using W-10 64 Bits.
It is normal?. Any solution?. Up to what version can I go up without
losing that possibility?
Very grateful in advance.
Antonio - EA7HJ
|
Roger Need
Dave Johnson
Ralph Bolt, K?RO
Colin Campbell
Jempi ( ON7MA )