开云体育

It appears I may have killed my 2nd NanoVNA. Last time, I let the battery voltage drop too low, and in my effort to repair, I managed to snap some of the connectors off. This time, I had a display

A suggestion for this routine. Ask if the DUT is active or passive? If the device is passive and S21 is available then... Ask shall passivity be enforced? After enforcement of passivity is checked,

t's OK now. Yes I even had a lot of .s1p files in the directory. So, you gave me the idea to modify one so that there is an |S11| > 1 in And yes S11.EXE spotted it. ----------------------

Doe you have any s1p files in the same directory as s11 exe? how about???? s11.exe testfile.s1p???? as a syntax? Or just s11.exe?? and the directory contains s1p files, that seems logical.

OK; I understood what it could be used for. What I didn't understand is how S11.EXE is used (its syntax). S11 -? returns nothing S11 /? returns nothing S11 returns in a window This program checks

Everyone did , because you subcribed Op zo 28 aug. 2022 07:59 schreef F1AMM <18471@...>:

the usage: in an S1P file, or part of columns of a S2P file (where S11 is also incorporated),? the reflection coefficient is reported. By definition the coefficient can never be >1. There's something

Khalid, Depending on your requirements, you could look at using a Pluto with Satsagen with the third harmonic option. It's not vector, though. https://www.albfer.com/en/2020/02/21/satsagen-2/

Hello I received this email * /S11.EXE ( /g/nanovna-users/files/S11.EXE ) *By:* Brian Beezley <k6sti@...> *Description:* This Windows program checks Touchstone files for |S11| >

Hello Roger and Larry, Thanks everyone for your support and information. I really appreciate your help. Roger, Yes, I have LiteVNA64, however, I am looking for higher frequency range, and this is the

NanoVNA-App allow select receive calibrated and not calibrated data H/H4 devices by default send calibrated data (this mode for old software) V2/Lite by default send not calibrated data Not shure, but

I thought that but wanted to be sure, thanks!

it does not mess up cause in the app only apps calibration is used and in the device only devices calib is used they do not interact cause the device (even if calibrated) sends raw data over usb

Why not try and share your learnings? -- NanoVNA Wiki: /g/nanovna-users/wiki/home NanoVNA Files: /g/nanovna-users/files Erik, PD0EK

With all the nanovna.app version mod by other people, is there a website that tells what is the difference in them? Thanks

I think this hardware LCD module problem, my LCD on V2Plus4 also have artefacts on screenshots, i replace module, and after this all ok. I can`t solve this by software (i think use different LCD

Also, is it best to not calibrate the nanovna itself and just have the raw data out because a person would be using the nanovna.app to calibrate? I would assume if you calibrate the nanvna AND the

I use the NanoVNA-App v1.1.209 (build by Owen Duffy) together with a NanoVNA V2Plus4 running the current DiSlord firmware (v1.3.07, see first screenshot). I noticed that coloured screenshots look

I had no problem flashing the current DiSlord firmware (v1.3.07, see attached screenshot) onto my V2Plus4 (from the first series of devices sold by nanoRFW) using NanoVNA-App v1.1.209 (build by Owen

The following files and folders have been uploaded to the Files area of the [email protected] group. * /S11.EXE ( /g/nanovna-users/files/S11.EXE ) *By:* Brian Beezley