开云体育

I'm not an expert but this is what I understood: Zplot is able to determine the impedance of the feed cable (if different from pure 50ohm) It also is able to calculate the frequency dependent loss

Dear Erik, regarding your method: "Using nanoVNA saver you can measure your antenna feedline with the antenna disconnected and replaced with a OPEN/SHORT The resulting two touchstone files can be

Dear pgc1682 The nanoVNA is a wonderful example of how to do the best with the least at a price point everyone can afford. Has this lead to compromise? Yes. example is the size of the screen or the

Hello, This email message is a notification to let you know that the following files have been updated in the Files area of the [email protected] group. *

Paul, It sounds as if you did not calibrate the Nano correctly and the PC app is getting corrupted data. Please follow the various calibration instructions either on the forum Wiki or in the User

Rune, thanks for the reply, much appreciated. I download the '64' version of VC++ 2015 first and that didn't work...8^) Then did the same for the '86; version and Eureka!.. There it is, a window full

I get a similar problem,for the first few mins the screen jitters all over the place,then settles down but i have no cursor on the polar or smith chart,its pretty much unusable as it is for me.

Hi Kurt and others, Sorry for wrong copied new post. I deleted it. Now the the correct reply: Thanks for the detailed reply. You can send to me the measurements in file s1p format? You can measure

My unit came from an eBay supplier in Basildon Essex, however the listing is no longer there. I would suggest the nanovna-h which comes with case and all accessories including a USB-C to USB-C lead

Gwen, Thank you for this interesting solution, think I will leave this Chromebook stock (Version 76.0.3809.136 (Official Build) (64-bit) as there are several laptops and desktops also in us here, the

Have you had any other versions of NanoVNA-Saver running previously? Do you know if you have a new-ish version of the Microsoft VC++ Redistributable library installed? (I think it should be included

I may just do that thing, me. Got a couple of NanoVNAs sitting here. I just hadn't gotten around to trying the web client yet with it. But that can be done. 73, Gwen, NG3P

No problem. We all get ahead when we 'play' with our 'toys'? ;-) On Fri, 6 Dec 2019 at 5:44 AM, Gyula Molnar<gyula.ha3hz@...> wrote: Hi Larry, I'm glad that many people have noticed what the

Hi Larry, I'm glad that many people have noticed what the original author wrote in the "Know issues" section of the NanoVNA alpha1 kit assembly manual. I think the same way, thank you for trying to

Downloaded the file and moved it to a different folder. Apps nanovna-saver-v0.2.1.exe Clicked on the file to run it. A window opened, a flashing cursor appeared briefly then the dialog box shown in

When I received my first nano a white gecko clone, the first thing I did was drop it with the dinky microusb cable plugged in. The entire usb connector pulled off and was basically destroyed.. So I

For everyone that wants to do complex transmission line analysis and has access to a sufficiently new MSOffice suite I suggest they use ZPlot, a free tool written in Excel It can be downloaded from

Hi Paul, I did ask you to clarify what the problem was, and what environment you're running it on. Your description of the problem is in no way clear enough for me to be able to answer it as it

is no one going to answer my question then?

Hi, Starting from the end of November 2019, we(NanoVNA-F team) no longer produce RF Demo Kits with WWW.S*T.COM mark.