开云体育

Hello Ulrich, the NanoVNA-Saver application calibration is in addition to a calibration done on the device. You should always use the *same* calibration on the NanoVNA itself when using

Hello all together, I'm slightly confused how calibration parameters are used when running NanoVNA as stand-alone device or when connecting to Saver SW. As stand alone I calibrate NanoVNA as

Very well. So is your calibration kit now type N, SOL and Thru or Type BNC? Alan

Jim Allyn - N7JA wrote: This sort of thing has been going on for quite awhile. You may receive -something- for you $15, and the first time you plug it in (and heaven help you if it's a WinBlows

They are all over ebay and amazon.? All scams, of course. This is a bit more believable: https://www.newegg.com/kingston-model-dtugt-1tb/p/N82E16820242415 ???? One TB for $454, or two TB for

Bill, In order for a shield to be effective it has to be continuous and grounded. Adding shielding inside perimeter of the case with conductive paint would be in-effective because there are too many

I just received my NanoVNA. Mine turned out to be the model with the black front and the battery on a plug. There is no shielding on the board near the SMA connectors. I printed a case for it that

You're actually better with an external USB SSD hard drive. It's a lot faster than a stick.

Please let us all know where to purchase one of these 2TB memory sticks!! On Thu, 7 Nov 2019 at 5:06 PM, vaclav_sal via Groups.Io<vaclav_sal@...> wrote: I had a little free time to

I finally mounted my Nano onto a piece of aluminum. I have very little use for SMA connectors and the cal kit supplied. Now I am doing most everything with BNC but can also used N connectors. Hope the

links at second line of /g/nanovna-users/wiki/Building-Firmware and e.g. https://www.playembedded.org/blog/demos-chibios-stm32/ That is the purpose for git; create a branch

I had a little free time to read mail here. I woudl like to offer my advise to anybody struggling with ANY, even newer version of Windoze. As long as your PROCESSOR is decent, ditch Windoze. For about

Oristo, perfect answer. I gust I need to add wiki to list of resources. A follow-up questions / comments I have not figured out how to " rebuild " the whole firmware , working on that step. I assume

Some links here: /g/nanovna-users/wiki/Building-Firmware

Vaclav, This is the wrong place to ask about ChibiOS.?? Send the repo owner a message asking about it or just got here:? http://chibios.org/dokuwiki/doku.php ? ? ChibiOS is a real-time executive

This is being written on a computer running Linux Mint, and NanoVNAsaver runs on it just fine.

This may be very long shot posting here , but.... I am attaching part of what EGit "created" from local repository of NanoVNA software. Apparently these files are some kind of modules the software is

There are hundreds of known exploits for Windows XP, exploits for which there are no patches.? If you are still using Windows XP, your computer has undoubtedly already been compromised, long ago, and

The Bluetooth dongles were posted just for illustration what is on the market. I am not in a position to offer any more at this time, nor discuss it. I am still concentrating on hacking the NanoVNA

Larry - Thanks for the help and encouragement. However, apparently the kind of experience I had before (with Linux Mint, I think) would continue, and if I installed a new one, nanovnasaver still