开云体育

I didn't have an SMT diode so just used an axial 1N4148. Can be done if one forms the leads with fine-point tweezers. It works fine. Also, used the clipped lead wires to make little hooks for

So what I want to do is using another display, for example a display with an ili9486 controller instead of the ili9341. What I want to know is how hard it is to modify the software. Do I just replace

I have two Nanos and neither had the diode. I added the diode shown on the schematic an SD103AWS SMD part and then the battery indicator will work fine. Note it interferes with the battery connector

Eu adicionei o diodo 1N4148 (D2 proximo ao conector bateria). Atualizei o FW 0.2.3-20191008

And i did

Jeff,, Thanks for taking an interest. The answer is no. I'm very careful and took into account all the SMD parts locations. No, I don't see how I could have done that. I made sure that the edges of

Mike, any chance that the shield is shorting out C26 or C27? Jeff, k6jca

That's a great case, I'm going to print one today :)

To the first nano I got (the one with the white 3D printed case) I added my own carefully-made copper shields. I recently got another Nano (the one with the orange case). It also came with no shields.

Are some NanoVNAs shipping with the D2 voltage sensing diode installed? None of the ones I have in hand populate the diode and I did not notice it any of the online photos of the interior that I

From what I can tell here, most all the NanoVNAs you order work. The first thing to watch out for when ordering lowest cost is "no battery included". Most people will need this and unless you can buy

I tried to find AURSINC but my search foo must be broken, can someone post up a link please. Btw that TaoBao express site is a complete black hole, I'm cancelling that order. Nothing has happened for

Me too

That worked, thanks. Mel, K6KBE

Ok, I rescan isn’t finding anything, so I will try manual also Thx Dana

If you do get in a position to produce a PDF that at least resembles *’ A scientific paper, with labels on the axes of graphs. * A draft scientific paper, with labels on the axes of graphs. * A

#65 : [TheLeastVNA] Code - Update 20191020 Hello, Allow us, please, to inform you that we just uploaded the new version of our /F/L/O/S/S/:

GIN & PEZ; Up to the presentation of your [LeastVNA] formula: G=(g-l)(o-s)/[(g-o)(s-l)-(g-s)(l-o)], and provided in executable form as BBC BASIC source code, I interpret as an alternative calibration

Hi Dana, In OSX the nanoVNA is shown as "/dev/cu.usbmodem4001" Normally rescan will automatically connect. You could try however to manually enter the string above Eric

Hmmm, Larry, so it may be a Catalina issue as it doesn’t find the usb… I’ll try it on Mojave and see if that works…thanks for the comments. Oh by the way what version of Python are you using??