开云体育

There are some features that I would like added to the firmware connected with calibration. I don’t mind making them public, but are quite happy to just add them for my own use. Are there any

Indeed, that is the question, and I >>suspect<< is why some notice more reliable nanoVNA connections via USB-2 hubs than to USB-3 hosts. USB-C connectors are mechanically symmetric. In order for half

Hi ... I would like to try You new nanoVNA v1.03 TD Rb4 (like TDR ...) Thank You, Vlatko

Hi Here is how to split "any somewhat formatted" text file using Excel 2003*. The procedure has been the same since the early 1990'ies: - Open the file in Excel - When the "Text Import Wizard" shows

Changed the offset from 5kHz to 12kHz and running the nanoVNA directly from a linear 5V power supply. Even with USB connected the latter makes a substantial difference in noise levels Guess adding

[email protected]> wrote: Yes, and F connectors too. Yes, transformers will work, and given the fairy low dynamic range of the NanoVNA, transformers would be better in *most* cases. However, by their

Jacon, if the resistors are missing, what does that do to USB communication? Are they just for using the USB as a sink (load?) for charging a battery through the USB port? Without them does the

Herb, The S2P file can be in decibels and phase angle, or in real and imaginary part for each component. In this case, I think "RI" indicates real and imaginary for each of the four S parameters (S11,

Herb, As you know S-Parameter files are actually text files. The line with the "#" character is the format string for the file. This may or may not be the first line in a file. In the case above, the

I started this topic because the original thread got hi-jacked to antennas matching. :-( H Walker posted in Msg #4702 /DMR, /Thanks for your contribution. A previous DFU file was uploaded for making

QRP, I had looked at the S2P file using a text editor and could see the values were space delimited but the none of the columns were identifiable to me as the S21 log magnitude values displayed by the

What is your modification exactly?

S1P and S2P files are CSV compatible. You can just copy it's content into excel

I have some S21 data (see attachment) that I want import into Excel as either tab or comma delimited frequency data pair. Neither nanovna-saver or nanoVNASharp support exporting to a CSV file. Has

This should help find things in menus: http://ormpoa.altervista.org/Hnano.htm .. or this, for newer firmwares: https://oristopo.github.io/nVhelp/html/Menu.htm You could first turn of all traces, then

Sorry, Just got my second NanoVNA. The first one was DOA, back screen light, but no display. Second one seems to work fine at my limited time getting to know it. A few questions, I am used to working

I agree. This is true of any lossless (or essentially lossless) matching network (be it a tuned feedline or a lumped-element matching network) that has been tuned to match an impedance attached to the

Oristo, I just googled this term "USB TypeC CC resistor" and read docs from ST & Cypress that appeared: https://www.st.com/resource/en/technical_article/dm00496853.pdf (page 8)

I do not understand; nanoVNA ties together DN and DP from either side of USB-C. If both CC pins were terminated in nanoVNA, then would that not inform USB hosts that both sides are available

DJ7BA, Thanks for your input. I have already ordered another, and plan to use the old one just as you described. 73, Andy - W4KIL