开云体育

Hi Rune, I asked because some programs require minimal resolutions, otherwise dialog boxes etc. are cut off. Good to know that this is not the case with nanovna-saver. Regards, Arndt Am 24.09.19 um

It almost looks like you already have! ;-) I'll definitely consider it. -- Rune / 5Q5R

It doesn't *require* any particular resolution, but the interface only fits in the vertical direction if there's at least ~750 pixels. So there would be scroll bars. It's not the end of the world. :-)

Hi RUne, Might you be able to add a port rescan button so we don't have to restart the application if we change USB ports? Thanks, Larry

Hello, What is the minimal screen resolution for nanovna-saver? I have an old netbook with 1024 x 600 pixels which I could take with me to connect to the nanovna. Regards, Arndt

Hi Erik Super, I will test it within a couple of days as I am on a job where T-Check will be made Kind regards Kurt -----Oprindelig meddelelse----- Fra: [email protected]

+++++ --

Just tested previous firmware it works stable with 1 kHz span. Yes, it has wrong measurement with span below 100 Hz. But the new firmware is unstable below 10 kHz, this is much more worse...

Hi to everyone, About the nanovna2. I really dont mind the screen size. I have the first one and find it ok. The only thing is that if used outside it is low in lights. But the size, not a problem, I

Hello, Allow us, please, to summarize briefly: (0) The measurement uncertainty is error-bounds of the measurement. (1) If a measurement does not involve mathematical expressions then someone can

n Tue, 24 Sep 2019 at 10:28, <reuterr@...> wrote: screen similar to that does display. But it is for such a short period, I can't read it. I guess if I used a phone to video it, I could probably

VNAs here going up to 20 GHz, building another is not high on my priority list. Perhaps if I was retired, it is something I would do. When I briefly showed the NanoVNA at my radio club, several

The name of my company, it's company number, where it is registered, and the registered address is required under UK law. I would have thought my messages are shorted than most, as I only quote

It seems not https://zs1sci.com/blog/nanovnasaver/

I saw his schematics and RF simulation files too when it was public repository. /g/nanovna-users/message/2148 Seems NanoVNA2 dev hiding his works...

As another way to isolate the source of the 1KHz peaks I ran a test where I adjusted the PLL i

I use a home build VNA for measurements above 900MHz so have no interest to buy anything else.

I suggest the ADF5355 also but it is much more expensive than the ADF4351 (especially if you need two of them)... https://www.analog.com/media/en/technical-documentation/data-sheets/ADF5355.pdf About

Indeed, thanks

If you want a really big screen you can easily build on yourself using very similar HW and some ebay modules. Two ADF4351 generators, a resistive bridge and some AIM81001 mixers dead bug style on a