开云体育

Larry....my nano is an h...the nano functions by itself normally display, calculation. etc. The software that I am trying to install on the computer is nanovna-saver, v 3.8. The saver software

Old thread here (it was about the clones of transverters-store 3GHz RF bridges) .. I eventually got around to looking at these bridges. I ended up with both a blue board and a green board, the latter

Problem solved. You need to delete the older 'NanoVNA-App.ini' file and then start .exe to create a new .ini file. The program can then be used as usual. 73, Gyula HA3HZ -- *** If you are not part of

Hello Royce, have You following programs: 1. DfuSeDemo 2. NanoVNA-APP 1.1.206 ? look at the picture: on the left are the contacts for reboot: 1. have you driver already installed? Program DfuSeDemo

Hi Vladimir, I have the nanovna-h...........the only way to get to the dvy mode is to do from list....i did all the steps to update the firmware, but when I disconnected the nanovna-h from the pc, and

Thanks pjzzz, Dave, and Jim for the additional replies. I've been studying ferrites now for several weeks and am amazed at the amount of information available. The Fair-Rite Products website has a lot

Hello Royce! NanoVNA-H has a white screen in dfu mode, but NanoVNA-H4, on the other hand, is black. Which device do you have? Vladimir, dl7pga

Thanks for the response.... however...when I connect to the PC it's not recognized by the PC or the progaming software..... also when the nanovna-h is in gfu mode, the screen is black...... not

Frank, Although many would love to be able to read other's minds, we can't. So - please tell us what application you're using that generates this error and state how you're using it and what you did

the software gives me the error message... I have tried everything under the sun to correct the situation. I am totally stumped.

Walt, I had the same success following your procedure using my NanoVNA-H with Windows 10. I set the com and connect and did a single sweep and it does not show the error when I hover over the grid.

Thank You Larry! I just want to test. Vladimir

It's on https://github.com/OneOfEleven/NanoVNA-H/tree/master/Release? but there is a graphics error generated when you hover the mouse over the graph area.

why should i publish a faulty program? I am trying to reach the author. -- *** If you are not part of the solution, then you are the problem. ( http://ha3hz.hu/ ) ***

Gyula, the topic was about the problems with NanoVNA-APP 1.1.207. I asked where I can download the program. I already know version 1.1.206. Does version 1.1.207 even exist? Vladimir

Hi Vladimir, I don't understand why you're having trouble with this? At cqham.ru, you just gave someone the link in .zip format. And on my site, when you read the NanoVNA article and get to the

Hello Gyula, here is a screenshot of download from Your website ( smartphone picture) Vladimir

Hello Gyula! I ask over the Version 1.1.207. I have 1.1.206 and it works very good under W10Pro 64 bit. 73! Vladimir dl7pga

Hi Royce, Read on my website for what to do in this case. You can’t spoil it, just do what is described. As long as the screen is white, your device is in dfu mode. (of course, if you didn't drop it

I flashed the wrong firmware version on my nanovna-h recently and got the white screen... /g/nanovna-users/message/21149 HTH