Re: Nano Vna Pre-Order?
Would you please post a link to that site. Burt, K6OQK
By
Burt K6OQK
·
#137
·
|
Re: Nano Vna Pre-Order?
I bought the NanoVNA from elecdesign2015 on ebay and got the item pretty quickly, including battery and cables and short/open/load tests for under $60. The battery was charged. I'm able to talk to the
By
Paul Alfille
·
#136
·
|
Re: Nano Vna Pre-Order?
[email protected]> wrote: eBay item 254253727598 has a 400 mA hr battery. I ordered one on the 6th June, but it was not dispatched until the 29th June, so you might want to consider that. All of the
By
Dr. David Kirkby from Kirkby Microwave Ltd <drkirkby@...>
·
#135
·
|
Re: Calibration coefficients - can one change them?
Hello, Dr. David. You can set the electrical delay with "DISPLAY, SCALE , ELECTRICALDELAY". Yes, commercial calibrations are not required to be as short as possible, they can provide accurate
By
Hugen
·
#134
·
|
Re: Nano Vna Pre-Order?
Hi Stuart, That unit comes with a battery, per the written description and you can just make out the battery looking at a side view of the unit. In any case, the black unit also has shields over the 3
By
Larry Rothman
·
#133
·
|
Active Loop Antenna captured S11
Here is the nanoVNA capturing a 40 meter table top loop. The pre selector is in bypass mode. At these frequencies the response is essentially spot on with the big box. This much fun should be illegal.
By
alan victor
·
#132
·
|
Re: Nano Vna Pre-Order?
Thanks for the link Larry. I am going to order one. Not 100% convinced that the battery is included, but that isn't a big deal. I have several scalar network analyzers up to 26.5 GHz but no VNA. Would
By
Stuart Landau
·
#131
·
|
Re: Nano Vna Pre-Order?
I got mine from lifangduo1006_0 <http://www.ebay.com/usr/lifangduo1006_0?_trksid=p2057872.m2749.l2754>. It was $75. After looking at ll the others for less, I guess I didn't get a bad deal. It has a
By
Frank S
·
#130
·
|
Re: Nano Vna Pre-Order?
Sometimes the best price is not a bargain. Burt, K6QOK Burt I. Weiner Associates Broadcast Technical Services Glendale, California U.S.A. biwa@... K6OQK -- Burt I. Weiner Associates Broadcast
By
Burt K6OQK
·
#129
·
|
Re: Nano Vna Pre-Order?
I actually have a few Agilent cal standards my self. Did microwave product testing for 3 years at a previous job. Now as a ham I miss having access to my lovely Agilent 5230A ;) [email protected]>
By
Tim Keller
·
#128
·
|
Re: Nano Vna Pre-Order?
I just ordered from this Aliexpress vendor:: https://www.aliexpress.com/item/33043060569.html He had the cheapest black unit and the photos show batteries and cables & cal adapters. The down side is
By
Larry Rothman
·
#127
·
|
Re: Nano Vna Pre-Order?
I looked at?Aliexpress but saw no one offering a battery. All of the descriptions seemed to be actually the same. Since there seem to be variations among those offered, it is a great help to know
By
Stuart Landau
·
#126
·
|
Re: Messaging (over USB-C) between nanovna and PC client - documented (or could be)?
The dates are slightly different when firmware is installed. I used the firmware dated June 11 (20190611). But when I checked the firmware info inside the NanoVNA it said June 12, so that is what I
By
George
·
#125
·
|
Re: Calibration coefficients - can one change them?
Spot on Dave, I agree. Addressing this process would provide a nice value added capability. Alan ________________________________ Sent: Wednesday, July 3, 2019 2:57 PM To: nanovna-users Subject: Re:
By
alan victor
·
#124
·
|
Re: Messaging (over USB-C) between nanovna and PC client - documented (or could be)?
I just ordered the black unit with cables and battery and you're right, the Gecko unit is slightly inferior. Have you found the source code repository for the June 12 versions of F/W? All I have are
By
Larry Rothman
·
#123
·
|
Re: Calibration coefficients - can one change them?
Okay, I get what you are saying now. That problem should I guess be resolvable in the firmware, although it will take a very careful look at the firmware to see how to resolve it. But the problem
By
Dr. David Kirkby from Kirkby Microwave Ltd <drkirkby@...>
·
#122
·
|
Re: Messaging (over USB-C) between nanovna and PC client - documented (or could be)?
Hi Larry, You did a good job with the command list. No problems found! Yes, there are several versions of the NanoVNA firmware. I have found that the June 12 version is the best. It fixes the problem
By
George
·
#121
·
|
Re: Nano Vna Pre-Order?
Oh I use banggood all the time. I am more of "when is it coming" does anyone know. I ordered it on may 26th.... But its a waiting game i guess. Just being impatient :P Definitely need to get a batter
By
Tim Keller
·
#120
·
|
Re: Nano Vna Pre-Order?
Banggood, Gearbest, Tomtop and a few others are like Aliexpress and eBay (buy it now mode) - they are an umbrella of many vendors that take a % of sales. You shouldn't have a problem - I've bought
By
Larry Rothman
·
#119
·
|
Nano Vna Pre-Order?
I pre-ordered my Nano-VNA from
By
Tim Keller
·
#118
·
|