开云体育

On Wed, Apr 1, 2020 at 04:56 PM, DiSlord wrote: ... Font size not change ... About points count, i test on my NanoVNA-H variable points set (51 and 101) all worked. For H4 a try complete this then i

How do I remove the screen cover sheet. Do I have to disassemble top cover?

I don't remember this being mentioned before: When the S-A-A-2 (NanoVNA-V2) frequency is changed, it does a "self cal" using an open, short, and load on its Port 0 input switch. The result is not

Font size not change, change only some glyph like 'T', 'Y', 'V', 'M', 'K', 'R', 'C', '0', '3', '.', ':', ',' (and some small lile 'b', 'x', 'g', 'v') About points count, i test on my NanoVNA-H

John, I used a hard shell plastic case with a foam liner that my $35 microphone came in.? I suspect, then, that those cases are readily available cheap somewhere! 73 Glen K4KV

I have always used a Tee connector with the signal generator and the signal detector connected to the straight through connections, and the stub connected to the 90 degree angled connector. Just about

On Wed, Apr 1, 2020 at 10:17 AM, DiSlord wrote: I hope updated font look better =============================================== DiSlord, The larger AA fonts in the previous beta firmware version might

I don't know because I have not used this firmware. Roger

Yes thats what I was thinking about...! Thanks for the headsup. One question before I flash it, fully compatible with nanovnasaver? Cheers! Luis CT2FZI <http://goog_717545661> [email protected]>

Try the reald firmware. Bigger fonts for use in sunlight... You will find it here>> https://github.com/reald/NanoVNA/releases

Hello everyone, specially our developers. Since we have an Antenna Analyzer version of our FW, can we have it more simple for field use? Simple information like SWR, or at least lowest SWR, etc...

1/4 w stubs for filtering harmonics in a so2r setup

Thanks DiSlord you are absolutely right , I added the? "d" and it's ok, sorry my fault. Jos Op 1-4-2020 om 20:33 schreef DiSlord:

Need use 'bandwidth' You enter 'bandwith' lost 'd' Use 'help' command for recive list of all supported commands

Hi DiSlord, Thanks for the new firmware. I flashed it and it runs OK. font looks ok to me,? but I tried the bandwith command, when I enter bandwith, bandwith 9 or whatever number, I always get back

Small update for NanoVNA-H4 https://drive.google.com/file/d/1jeMHJhU9Ry6Vje8GYYcss6LJzIjd0QnF/view?usp=sharing Font fixes (try made mo readable, fix some font glyph) Little slowdown i2c bus (as i

I use a high impact case from Apache.

I've got mine in a belt-mounted digital camera soft-case with two compartments - one for the nano and the other for adapters and cables. https://www.amazon.com/s?k=digital+camera+case&ref=nb_sb_noss_2

John, https://www.harborfreight.com/1800-Weatherproof-Protective-Case-Small-64550.html Dave-KB1PVH Sent from my Galaxy S9

I'm wondering what folk are using for storing and transporting their NanoVNA and accessories. My little cardboard box is falling apart. Thanks -John