开云体育

At lower frequencies, the NanoVNA 2.0 uses the same chip as the version 1, an Si5351.? So, the output level will probably be similar.? At higher frequencies it uses an ADF4350, which has a rated

Herb, One thing I have not seen in the spec's so far is what the output level is. Have you measured that or do you know what it is? If I remember correctly the original version was in the -10 dbm

Missed the first batch, any idea when will it be avaiable in Tindie again? or is there any other place to buy it?

btw the V2 team is not just me ;) I'm just the only one publicly talking about it and even then I don't use my real name ;) I can confirm that currently the only way to exit USB mode is to toggle the

A correction to my review of the S-A-A-2. In addition to NanoVNA-QT, erik's last MOD of TAPR v4.6 located at /g/nanovna-users/files/NanoVNA%20PC%20Software/TAPR%20VNA/VNAR4.6.zip .

erik, I've been trying to transfer some of my NanoVNA scripts over to the S-A-A-2, and although its communicating, I'm operating blind. Any remote commands to the S-A-A-2 cause the screen to go white

They're back in stock. I ordered one an hour ago - it'll be here Monday. -- John AE5X https://ae5x.blogspot.com/

$79.95

I guess his DELETE button didn't work... On Sat, Mar 28, 2020 at 2:37 PM, vaclav_sal via Groups.Io<vaclav_sal@...> wrote: As a very seldom poster here I cannot help to make the

As a very seldom poster here I cannot help to make the following comments, "gained" from experience with few allegedly technical forums. Some of them amateur radio related, some not. I will freely

Good to know there are 3 ways to update the FW.? Thanks Erik Yes,? I used CON303 pins connected to ST-Link for updating the SW of my pre-production model to v2.2 All the SW is on github so you can

Schematics, PCB, diagrams etc at: https://gitlab.com/bepissneks/S-A-A

Yes, I used CON303 pins connected to ST-Link for updating the SW of my pre-production model to v2.2 All the SW is on github so you can modify, build, updated as you like. -- NanoVNA Wiki:

As of 3/28 AURSINC at your link above seems to be out of stock. There is only one ebay seller offering Rev3.4 that I could find, but currently priced at $106.75 !!

On Sat, Mar 28, 2020 at 06:45 AM, Larry Rothman wrote: Does the V2 have the port available for using an ST-link for flashing? ======================================================= Larry, That's

Many, many thanks for the really wonderful comparison of the models. I have a fairly early model, received in Mid-October, 2019 and hope to move up to a 4 inch model. Your comparison really helps!

Great write-up Herb! Does the V2 have the port available for using an ST-link for flashing? On Fri, 27 Mar 2020 at 10:10 PM, hwalker<herbwalker2476@...> wrote: ? ? I flipped a coin about three

On Sat, Mar 28, 2020 at 04:10 AM, Dallas KD4HNX wrote: I'm looking to purchase my first NanoVNA and I'm overwhelmed by which one to get. By chance have you done reviews of the other VNAs your club has

Herb, First I want to thank you for such a detailed report/review of the S-A-A-2. I'm looking to purchase my first NanoVNA and I'm overwhelmed by which one to get. By chance have you done reviews of

This is the 900Mhz version. I would get the 1.5 Ghz version Bob M