开云体育

Very nice, thanks.? On Sun, 6 Oct 2019 at 11:45 AM, Oristo<ormpoa@...> wrote: > > I hope there will be no objection to me sharing Easier to print:

Yes, I meant correction.You have a save menu after the correction button.. shouldn't be one. Correction is on or off.I still think reset should be at the top of the list and save after calibrate

I am aware of that, like I said, I'm new to RF, but I understand that without a non reactive part of impedance in the antenna, there's no power going into the antenna right? If the LC is at resonance,

Hi aa--something Cables length as such has basicly no influence. Consider the cable as part of the hardware system, they are calibrated away. The only effect is small potential phase variation if the

Thank you Erik, that explains it, an image.? So I just ignore the lower frequency of the two peaks.? And it's possible to calibrate the amplitude.? I will try the test of seeing the FM BC band with

See /g/nanovna-users/topic/34079496#3464

I tried my nanovna as a spectrum analyzer and it is interesting.? Amplitude isn't calibrated.? I measured my signal generator and it shows me two responses fairly close together; I verified on my

> > I hope there will be no objection to me sharing > > HTML is in public domain > https://github.com/oristopo/nVhelp/blob/master/html/Hnano.htm

Hi Larry - OK, I never dared press DFU and anyway added a slide switch for hard DFU, too often required for hangs.. OK, I see "CORRECTION", not "Calibration" Maybe raw data helps understanding impact

HTML is in public domain https://github.com/oristopo/nVhelp/blob/master/html/Hnano.htm

I wanted a printed chart that I can hang on my wall so I changed the color scheme. I hope there will be no objection to me sharing an ink-saving chart.

gin & pez @ arg; I am comforted that I seem to be approaching a conceptual understanding of your work. It has elevated my interest. I am responding to your question with an expanded definition that is

When you click the DFU menu button, you get the next menu with 2 items: Reset and Enter DFU and Cancel.? The full word:. Calibration is a switch that can be inverted text to show calibration is being

Since ohms are obviously not watts, please give us the formula that you are using for that conclusion.

Hi Larry - I totally agree and can rearrange that on the tree.. Actually, I calibrate pretty often, nearly every time before measurement, to consider everything except DUT as "ideal". Yes, but my CSS

Also, touch screen seems much less responsive than Gen Hu releases, and hung repeatedly (requiring power off/on) when trying to set START stimulus.. ... back to NanoVNA-H__900_ch_20191003.dfu

It eventually hung at power-on for me WITHOUT doing touchscreen calibration, fortunately after capturing mostly legible menu screens. Took this opportunity to exercise starbuck5250's DFU-from-Hex

Hi, I replaced the cables with much shorter ones, and re-calibrated using these 2 new cables (see attached photos), and I am getting the same results. Not sure the cables interfere with the nanoVNA

Hi, I am fairly new to RF and have been working in electronics as a hobby for decades, but have recently gone back to school and am working toward an engineering degree, either electrical or

Thank you for your response. During SOLT calibration, I included the two black coaxial cables, so I thought that this way, I neutralized any effect of the connecting cables. Can you please elaborate