Re: Not available at Ali Express / Zeenko
You have a million times greater chance of your card details getting stolen when paying for gas than the same happening when using PayPal. <ve3fh@...> wrote:
By
Dragan Milivojevic
·
#33972
·
|
Re: Not available at Ali Express / Zeenko
I share your concerns. I bought my TinySA from the SeeSii store in ebay.ca, it?and arrived in six days and shipping was USD $2.99, they do carry the NanoVNA H4 and I'll probably buy a NanoVNA from
By
Julio VE3FH
·
#33971
·
|
Re: How do you measure a car antenna?
It used to be that all we had to worry about was light pollution, just try to find a place where you can see the Milky Way. As more and more RF/wireless devices and other electronic devices that
By
Geoff Peters - AB6BT
·
#33970
·
|
Re: How do you measure a car antenna?
Did the Commission or its representative look to see if the device is causing harmful interference? Probably not... Because if they had, they would have found that the device IS causing harmful
By
Geoff Peters - AB6BT
·
#33968
·
|
Re: How do you measure a car antenna?
"The operator of the exempted device shall be required to stop operating the device upon a finding by the Commission or its representative that the device is causing harmful interference. Operation
By
Geoff Peters - AB6BT
·
#33965
·
|
Re: How do you measure a car antenna?
Here's the exempted devices paragraph from Title 47, C.F.R. Part 15 ============================================================ ¡ì 15.103 Exempted devices. Except as provided in paragraph (j)
By
Frank Evans
·
#33964
·
|
Re: How do you measure a car antenna?
Hmmmm... so you'll be 'testing' while you're applying the brakes???
By
Mike C.
·
#33963
·
|
Re: nano VNA-H will not connect via USB to control apps on Win10 - help please
1. Nanovna-H and Nanovna-H4 do not require a driver under Windows 10 to connect to Nanovna-app, etc. 2. So either there is some problem with your nanovna, the cable, or the computer. 3. I recommend
By
Stan Dye
·
#33962
·
|
Re: How do you measure a car antenna?
Also, the older tube type car radios used vibrators and a transformer to generate the necessary plate voltages for the tubes. Those vibrator circuits generated some noise. Zack W9SZ
By
Zack Widup
·
#33961
·
|
Re: Not available at Ali Express / Zeenko
Same here. I've been very happy with it. Zack W9SZ
By
Zack Widup
·
#33960
·
|
Re: USB vs no USB readings Plots change...
Back in the 70's I worked for GE testing yokes on TV's. The yokes had a couple of layers of #22 enameled wire etc... I say all this to open some ideas or complaints regarding using these yokes to do
By
Mike C.
·
#33959
·
|
Re: How do you measure a car antenna?
Well, some of them kind of do.? ? ?Part of Dynamic Braking! Kent
By
KENT BRITAIN
·
#33958
·
|
Re: Not available at Ali Express / Zeenko
Randl.com is where I got my H4.
By
Pirok-W4UNX
·
#33957
·
|
Re: How do you measure a car antenna?
EV's don't have "alternators". :0)
By
Mike C.
·
#33956
·
|
Re: Not available at Ali Express / Zeenko
As someone who just got nanoVNA 4 from amazon I recommend following this guide from nanovna.com to ensure you get a legit one that is firmware upgradable. https://nanovna.com/?page_id=121
By
Tim Sooley KD2YYI
·
#33954
·
|
Re: Not available at Ali Express / Zeenko
I THINK you can buy the nano VNA 4 on Amazon.
By
Jim VE7RF
·
#33953
·
|
Re: nano VNA-H will not connect via USB to control apps on Win10 - help please
Hi Paul There are no devices shown in gray. nanoVNA-QT can't see the device. Instructions in https://nanorfe.com/nanovna-software.html say it needs a driver. I installed CypressDriverInstaller_1.exe
By
Brian Stokes <brianstokes@...>
·
#33951
·
|
Re: nano VNA-H will not connect via USB to control apps on Win10 - help please
Hi Steve yes, I have 4 cables, all check good using other devices Thanks
By
Brian Stokes <brianstokes@...>
·
#33950
·
|
Re: nano VNA-H will not connect via USB to control apps on Win10 - help please
Hi Brian, Have you tried a different USB cable?? I use the same cable that I use with my Android cell phone and it works perfectly.? I use Win 10 and I never had to install different drivers...
By
SteveH <srh1950@...>
·
#33949
·
|
Re: nano VNA-H will not connect via USB to control apps on Win10 - help please
I don't think you need to add any drivers on Win 10... (Pretty sure, I didn't, anyway. But it's been quite a while.) You might try going into Device Manager, select View / Show Hidden Devices, and
By
Paul - AI7JR
·
#33948
·
|