开云体育

Hi Allison,
just a small correction: Python 2.7 is 9 years old, and at the time of
release was described as "the last major version in the 2.x series". The
author of Python requested that developers move from Python 2 to Python 3
in 2014.

I'll be happy to hear about it if you get the software running under Python
2.7. :-)

--
Rune / 5Q5R

N9KDY,

The last thing I need is yet another PC. If I really wanted one I'd get a NEW one
that can take linux direct (dell has a few) as it saves deinstalling the other cruft.

The sloggy machine runs it well enough, its the actual name of the machine
as in "allison@sloggy ~$". Its actually a Asus dual core 1.6ghz machine with
SSD. Its performance with Unbuntu 18.4 is decent. Not a racer but for
interpreted python its fine. I needed that version to get the Python 3.7 as
guess what, a new version of Python on the horizon.

So yes Python 2.7 is old nearly three years old! At the rate its going 3.7 will
old in a year and 3.8 is now the current version. See a pattern. However
that can be avoided by writing code that is less dependent on the latest
and greatest belles and whistles.

In the mean time I will get the code running under 2.7, right now it complains
a bit but nothing seem horrific.

So yes a lot of people telling people what they should do.

Allison
-----------------
I do not accept private email due to forum scraping groups.io

Latest firmwares I've found a picture of.
73, Gyula

I bought the same item, but in Blue. Arrived very quickly (free shipping) and the fit is PERFECT.

ron
N4UE

I purchased this one on ebay:


Good luck.

Marco

I like this one -



Printed several myself came out fine.

Although I don't have a moulded housing around my Nano yet, I carry it in. Small digital camera Case that has a second pouch where I keep the adapters and cal references.?
Everything fits perfectly.??
Say HI to Justin for me ?



On Sat, 30 Nov 2019 at 11:42 AM, Michael Babineau<mbabineau.ve3wmb@...> wrote: Larry :

Very good advice, thanks.

I did some dabbling in 3D printing a couple of years ago. I forgot that you can open the files with
an STL viewer.

Our public library here in Ottawa has a lab with 3D printers, scanners etc and I did take their course.
I never did much with it so I have forgotten most of it, but printing it myself would be a cheaper option.

I envision using the Nano VNA in the field,? so I would to keep most of the dirt out.

Cheers

Michael VE3WMB

Larry :

Very good advice, thanks.

I did some dabbling in 3D printing a couple of years ago. I forgot that you can open the files with
an STL viewer.

Our public library here in Ottawa has a lab with 3D printers, scanners etc and I did take their course.
I never did much with it so I have forgotten most of it, but printing it myself would be a cheaper option.

I envision using the Nano VNA in the field, so I would to keep most of the dirt out.

Cheers

Michael VE3WMB

Hi Michael,Check to see what the backlog is at the Toronto reference library for their 3d printing lab. There are several other libraries in Ontario that host the labs as well as a number of creative hubs that may able to print for you.?
Next, download a viewer app and you can compare the dimensions of the thingverse item to your unit. All design files are downloadable from thingverse.?
I use Fast STL Viewer on my android tablet to view.?

Hope this helps.?
... Larry


On Sat, 30 Nov 2019 at 10:20 AM, Michael Babineau<mbabineau.ve3wmb@...> wrote: I recent got my NanoVNA clone from Amazon.

It seems to be a NanoVNA-H clone, white case, No Gecko on the front panel and no shielding.

I am looking to get a case 3D printed (I don't have my own printer) but I am a bit overwhelmed by
the number of options on Thingyverse and the comments about some cases not fitting some NanoVNAs.

Can anyone out there help me narrow down what case might fit ? (i.e. If you have the same model and have
found one of these cases that fits, can you tell me which one).

If I had my own printer I would just try them all but it is going to cost me money for 3rd party 3d-printing and likely shipping
so I would rather not do this by trial and error (i.e. my hope is that the case isn't going to cost me more than the VNA ! ).

Thanks in advance

Michael VE3WMB

hugen@... wrote: I have received feedback from multiple resellers, and a new clone manufacturer is selling them low-quality NanoVNA clones at a lower price.

Do you know who manufacturers the devices sold by Walmart for $38?

Yeah kinda hard to find anything. And if a noob dares ask for help, you probably will get flamed for not using the search function properly type of answers. Oh and a bonus, member emails are available for anyone with an internet connection.

I forgot to add. Mine has a USB-C port.

Michael VE3WMB

I recent got my NanoVNA clone from Amazon.

It seems to be a NanoVNA-H clone, white case, No Gecko on the front panel and no shielding.

I am looking to get a case 3D printed (I don't have my own printer) but I am a bit overwhelmed by
the number of options on Thingyverse and the comments about some cases not fitting some NanoVNAs.

Can anyone out there help me narrow down what case might fit ? (i.e. If you have the same model and have
found one of these cases that fits, can you tell me which one).

If I had my own printer I would just try them all but it is going to cost me money for 3rd party 3d-printing and likely shipping
so I would rather not do this by trial and error (i.e. my hope is that the case isn't going to cost me more than the VNA ! ).

Thanks in advance

Michael VE3WMB

there is no drivers section on the wiki files section

seems a pisspoorly organised site!!

Thanks! Considered applying your keen sense of organization
to the highly rewarding tasks of Wiki and Files maintenance and development.

Hi All
This new release NanoVNA-H_20191125_AA from


Is great due to large text

Kind regards

Kurt

Thanks Dave,

I have no problem with it. But I feel it is good to be aware of it.

The huge number of participants means a considerable chance
that someone got a Trojan virus harvesting all emails it can get.

So not showing emails is advisable indeed.

Hans
DJ7BA

-----Ursprüngliche Nachricht-----
Von: [email protected] <[email protected]> Im Auftrag von Dr. David Kirkby, Kirkby Microwave Ltd
Gesendet: Samstag, 30. November 2019 11:15
An: [email protected]
Betreff: Re: [nanovna-users] CAUTION: Phishing Attempt !! #phishing #malware

On Sat, 30 Nov 2019 at 09:51, DJ7BA <dj7ba@...> wrote:

By googeling for some term, without being registered, you will get
groups.io messages without any problem.

So even as groups.io is thought to be group-private: It isn't.

If you don't like that, imho you have no choice except not writing
anything of any private nature.

Hans
DJ7BA

But the group the group is configured as:

Visibility: Group listed in directory, publicly viewable.

But I don’t see any reason that the *content* messages should be hidden
from Google. Removing email addresses does have some merrit.

I suspect that individuals have a set of privacy settings that they can configure for themselves.


Dave


--
Dr. David Kirkby,
Kirkby Microwave Ltd,
drkirkby@...

Telephone 01621-680100./ +44 1621 680100

Registered in England & Wales, company number 08914892.
Registered office:
Stokes Hall Lodge, Burnham Rd, Althorne, Chelmsford, Essex, CM3 6DT, United Kingdom

From: Dean Smith

eddy_555 just released this 8 hours ago...
ver 0.5.2
Now shows multiple marker information
adds marker delta mode
here :-
=======================

Just found 0.5.3, which doesn't appear to go down to 10 kHz, or is that just me?

Thanks,
David
--
SatSignal Software - Quality software for you
Web:
Email: david-taylor@...
Twitter: @gm8arv

Problem solved !

I'm running the new Nanovna-Q software from Nov. 26.
Before calibration I did the RESET, sure. The calibration resistors are OK, I have two, one that came with the NanoVna and one from MiniCircuits.

The RESET procedure was the problem:
I did not realize that I also need to SAVE to Cx right after Reset. Otherwise the data isn't really cleared and remains in the memory.
If I remember correctly in previous firmware versions the RESET automatically cleared the memory loction without having to save actively.

Whatsoever, now it works fine again. Thanks for your inputs !

/g/nanovna-users/wiki/home
See windows 7 drivers

--
NanoVNA Wiki: /g/nanovna-users/wiki/home
NanoVNA Files: /g/nanovna-users/files
Erik, PD0EK

well what a wank answer!!