I give up...
toggle quoted message
Show quoted text
On 7/12/2023 3:31 PM, Neil Preston W0NRP via groups.io wrote: So, is there a Wintel executable, or do we have to compile it ourselves? If so, how do we do that?
Neil W?NRP
|
Good point, Geoff. I neglected to take that into account with my reply.
Richard N7NT
toggle quoted message
Show quoted text
On Jul 12, 2023, at 3:02 PM, Geoff Peters - AB6BT <AB6BT@...> wrote:
Richard,
That will not download the executable, just the source code...
73, Geoff - AB6BT
On 7/12/2023 2:42 PM, Richard Kendrick wrote:
Fred,
Go up two levels to the main page at Look for the Green box with the word Code and a triangle pointed down. Left mouse click on the green box and select ¡°Download ZIP¡± That should get you the code.
Richard N7NT
On Jul 12, 2023, at 2:28 PM, Fred Moore <n40cla@...> wrote:
Good evening Geoff.
Thanks for the link, however I can not find a way to download the app.
Usually there is a list of applications and all you need to do is click on
the one you want and that starts the download. But I can not find anything
at that link that leads me to the download. What am I missing?
Fred
On Wed, Jul 12, 2023 at 5:16?PM Geoff Peters - AB6BT <AB6BT@...>
wrote:
|
Hi Fred,
OK, I'm confused.. did you want the source code or the executable???
Geoff AB6BT
toggle quoted message
Show quoted text
On 7/12/2023 3:10 PM, Fred Moore wrote: Thank you Richard. I got it downloaded.
On Wed, Jul 12, 2023 at 5:57?PM Richard Kendrick <n7nt@...> wrote:
Fred,
Go up two levels to the main page at
Look for the Green box
with the word Code and a triangle pointed down. Left mouse click on the
green box and select ¡°Download ZIP¡± That should get you the code.
Richard N7NT
On Jul 12, 2023, at 2:28 PM, Fred Moore <n40cla@...> wrote:
Good evening Geoff.
Thanks for the link, however I can not find a way to download the app.
Usually there is a list of applications and all you need to do is click on
the one you want and that starts the download. But I can not find anything
at that link that leads me to the download. What am I missing?
Fred
On Wed, Jul 12, 2023 at 5:16?PM Geoff Peters - AB6BT <AB6BT@...>
wrote:
|
Thank you Richard. I got it downloaded.
toggle quoted message
Show quoted text
On Wed, Jul 12, 2023 at 5:57?PM Richard Kendrick <n7nt@...> wrote: Fred,
Go up two levels to the main page at
Look for the Green box
with the word Code and a triangle pointed down. Left mouse click on the
green box and select ¡°Download ZIP¡± That should get you the code.
Richard N7NT
On Jul 12, 2023, at 2:28 PM, Fred Moore <n40cla@...> wrote:
Good evening Geoff.
Thanks for the link, however I can not find a way to download the app.
Usually there is a list of applications and all you need to do is click on
the one you want and that starts the download. But I can not find anything
at that link that leads me to the download. What am I missing?
Fred
On Wed, Jul 12, 2023 at 5:16?PM Geoff Peters - AB6BT <AB6BT@...>
wrote:
|
Richard,
That will not download the executable, just the source code...
73, Geoff - AB6BT
toggle quoted message
Show quoted text
On 7/12/2023 2:42 PM, Richard Kendrick wrote: Fred,
Go up two levels to the main page at Look for the Green box with the word Code and a triangle pointed down. Left mouse click on the green box and select ¡°Download ZIP¡± That should get you the code.
Richard N7NT
On Jul 12, 2023, at 2:28 PM, Fred Moore <n40cla@...> wrote:
Good evening Geoff.
Thanks for the link, however I can not find a way to download the app.
Usually there is a list of applications and all you need to do is click on
the one you want and that starts the download. But I can not find anything
at that link that leads me to the download. What am I missing?
Fred
On Wed, Jul 12, 2023 at 5:16?PM Geoff Peters - AB6BT <AB6BT@...>
wrote:
|
Fred,
Go up two levels to the main page at Look for the Green box with the word Code and a triangle pointed down. Left mouse click on the green box and select ¡°Download ZIP¡± That should get you the code.
Richard N7NT
toggle quoted message
Show quoted text
On Jul 12, 2023, at 2:28 PM, Fred Moore <n40cla@...> wrote:
Good evening Geoff.
Thanks for the link, however I can not find a way to download the app.
Usually there is a list of applications and all you need to do is click on
the one you want and that starts the download. But I can not find anything
at that link that leads me to the download. What am I missing?
Fred
On Wed, Jul 12, 2023 at 5:16?PM Geoff Peters - AB6BT <AB6BT@...>
wrote:
|
Click on "NaonVAN-APP-exe". It will open a new page. On the right near the top is a Download icon.
|
Hi Fred, I ran into the same issue. Right-click on the link, and then click on ¡°Save link as...¡±. That should allow you to save it into your download folder. Ken -- WB?OCV From: Fred Moore Sent: Wednesday, July 12, 2023 05:29 PM To: [email protected]Subject: Re: [nanovna-users] nanovna-app Good evening Geoff. Thanks for the link, however I can not find a way to download the app. Usually there is a list of applications and all you need to do is click on the one you want and that starts the download. But I can not find anything at that link that leads me to the download. What am I missing? Fred
|
Good evening Geoff. Thanks for the link, however I can not find a way to download the app. Usually there is a list of applications and all you need to do is click on the one you want and that starts the download. But I can not find anything at that link that leads me to the download. What am I missing? Fred On Wed, Jul 12, 2023 at 5:16?PM Geoff Peters - AB6BT <AB6BT@...> wrote:
|
|
|
Re: Latest hardware version for NanoVNA-H4
Thanks to both for your valuable input.
|
Is there someone in the group that can point me to a working link where I
can download the nanovna-app? This is the application that one-of-eleven
and I think Dislord produced. This app is very similar to the
nanovna-saver.
Thanks
Fred
N4CLA
|
Managing markers gets me crazy
Hi. Managing multiple markers is often getting me crazy. Is there a documentation describing it in details? For example:
1) I f I set MARKER1 with TRACKING and SEARCH MINUMUM (e.g. searching the minimum SWR), can I set MARKER2 and 3 without the said feature (e.g. to be moved freely)?
2) Can I set a marker in order to search a specific value (e.g. SWR = 2)?
3) Can I set markers with a different colour of the associated trace (e.g. SWR trace in yellow and related markersd in blue?
4) What is the exact meaning of E-DELAY?
... and so on.
Thanks for your help.
|
Re: NanoVNA H4, Windows 11 and firmware update
Thank you very much to all of you for the interesting information.
|
|
|
Re: NanoVNA H4, Windows 11 and firmware update
Back about a week ago somebody else had a similar problem w/win 11. (I still run win 7) Seems there are some software switches that need setting for the COM ports. (no I'm not sure which article I saw it in)
Mike C. Sand Mtn Ga
toggle quoted message
Show quoted text
On 7/10/2023 8:36 AM, Andrea I2UEA wrote: Hi. I know that this topic has been covered a lot. However I can't make my NanoVNA be recognised by my PC running Windows 11 64-bit (latest version) using the DFU SE. Please note:
1) I have read and followed the beginners guide
2) I installed the driver, but no devices appear in the "Available DFU devices" upper selector in the DFU SE.
3) In the device manager, when I set my NanoVNA H4 in DFU mode, it appeard as "STM32 Bootloader" under "USB devices"
4) It does the same with my TinySA Ultra
5) If I use the STM32 Cube programmer, the NanovNA H4 is perfectly recognized, but it can manage only .bin files (no .dfu ones) and not all the FW versions are available in this format
6) For the over stated reason, I can easily update the firmware of my TinySA Ultra, but not the NanoVNA
I have heard that .dfu files can be converted into .bin files. This could solve definitely my problem. However I can't find specific and accurate instructions about that.
Any suggestions?
Many thanks. ?
|
Thanks for the info. Question. I went to the site you referenced and saw
2 references to 1.2.24. Are these just updates to 1.2.24 or are they
complete installs? because I looked at the two 1.2.24 references and they
were each a different size.
Is 1.2.24 available on GitHub?
Fred
My current level of code on my NanoVNA is 1.0.64 .
toggle quoted message
Show quoted text
On Tue, Jul 11, 2023 at 6:58?PM ±õ²õ³Ù±¹¨¢²Ô <erretrete@...> wrote: The last Application from DiSlord included in his 1.2.24 Firmware...
|
The last Application from DiSlord included in his 1.2.24 Firmware...
|
Re: Latest hardware version for NanoVNA-H4
On 7/11/23 12:51 PM, Roger Need via groups.io wrote: On Mon, Jul 10, 2023 at 06:38 AM, Ma?l H?rz wrote:
What is the latest hardware version of the NanoVNA-H4? And is there a
(minor) update planned, such as protection diodes, or something similar?
The latest version of the -H4 that I am aware of is version 4.3 which was released about 18 months ago by Hugen. It is a mature product and there probably won't be any more updates unless some parts become unavailable and he needs to do a circuit change. He did put a better 4" IPS display in the tinySA Ultra so maybe he is now using that in the current production runs of the -H4. .
A NanoVNA-H4 running "Auto" mode outputs 0.8 dBm at 30 MHz. so this precludes using any "protection diodes" on the front end. But the input impedance is 50 ohms and there have not been any reports of ESD damage that I have read in this group. That said users should exercise caution when handling the device, short antenna terminals before connecting them and not transmit when the NanoVNA is measuring a nearby antenna.
Roger
The NanoVNA2 with the RF switches in the front end is the one that's more ESD sensitive. Roger's right on the basic NanoVNAs - there's plenty of resistors behind the connector.
|
So where do you think the problem is
toggle quoted message
Show quoted text
On Tue, Jul 11, 2023, 14:40 Ho-Ro <linuxaudio@...> wrote: On Tue, Jul 11, 2023 at 08:06 PM, Fred Moore wrote:
Can someone please
point me to the correct download address for the latest H4 upgrade?
Fred,
DiSlord provides the latest firmware versions:
Martin
|
Andrea I2UEA
Mike C.