开云体育

On Friday, April 16, 2021, 10:32:29 AM EDT, Joe Rowe via groups.io <wa4ujt@...> wrote:

Just returned at Kohls,? will try from randi.com.? my supplier said they were not available now.

? ? On Thursday, April 15, 2021, 8:47:55 PM EDT, Larry Rothman <nlroth@...> wrote:

Order one from randl.com and you'll get a current unit.?


? On Thu., 15 Apr. 2021 at 7:42 p.m., Joe Rowe via groups.io<wa4ujt@...> wrote:? I suppose there is no way to get the latest edition if there is a reason to do so.

? ? On Thursday, April 15, 2021, 7:04:05 PM EDT, Charles E. Miller <wb6jhq@...> wrote:

If you bought it from Amazon there is no hassle returning it.? Drop off at Kohl’s, Whole Foods, or fire return via UPS.? Order a new one.? I had one with white display? got new one ASAP from Amazon.

On Thursday, April 15, 2021, 8:47:55 PM EDT, Larry Rothman <nlroth@...> wrote:

Order one from randl.com and you'll get a current unit.?


? On Thu., 15 Apr. 2021 at 7:42 p.m., Joe Rowe via groups.io<wa4ujt@...> wrote:? I suppose there is no way to get the latest edition if there is a reason to do so.

? ? On Thursday, April 15, 2021, 7:04:05 PM EDT, Charles E. Miller <wb6jhq@...> wrote:

If you bought it from Amazon there is no hassle returning it.? Drop off at Kohl’s, Whole Foods, or fire return via UPS.? Order a new one.? I had one with white display? got new one ASAP from Amazon.

On Thursday, April 15, 2021, 7:04:05 PM EDT, Charles E. Miller <wb6jhq@...> wrote:

If you bought it from Amazon there is no hassle returning it.? Drop off at Kohl’s, Whole Foods, or fire return via UPS.? Order a new one.? I had one with white display? got new one ASAP from Amazon.

On Thursday, April 15, 2021, 7:04:05 PM EDT, Charles E. Miller <wb6jhq@...> wrote:

If you bought it from Amazon there is no hassle returning it.? Drop off at Kohl’s, Whole Foods, or fire return via UPS.? Order a new one.? I had one with white display? got new one ASAP from Amazon.

El 16/04/2021 a las 0:51, EB4APL via groups.io escribió:

Hi Gyula,

The first .ini that you sent works, the program fails upon reloading.

But the using the last one it works ok. I'm going to examine the current .ini file generated by the working program and compare it line by line with the failing one to see where is the problem.

Thank you very much for your support,

Ignacio EB4APL


El 15/04/2021 a las 23:52, Gyula Molnar escribió:

Ignacio,
try this ini file, although it is created by the program itself. For me, the program starts from the E: / NanoVNA-App folder.
Connect the NanoVNA to the USB, start the program, then 'Connected' and 'Single scan'. Once you've drawn a graph, you'll be logged in next time.

73, Gyula HA3HZ

El 15/04/2021 a las 23:52, Gyula Molnar escribió:

Ignacio,
try this ini file, although it is created by the program itself. For me, the program starts from the E: / NanoVNA-App folder.
Connect the NanoVNA to the USB, start the program, then 'Connected' and 'Single scan'. Once you've drawn a graph, you'll be logged in next time.

73, Gyula HA3HZ

El 15/04/2021 a las 20:46, Gyula Molnar escribió:

Larry,
Try some computer tricks: delete the old ini, move it to the root folder, and restart the machine.
This can still be the magic solution.

On Monday, April 12, 2021, 11:14:03 AM EDT, Gyula Molnar <gyula.ha3hz@...> wrote:

Hi Joe,

Okay, this is from the first production.
Be sure to remove the cover, because if the touch screen is pressed anywhere, it will not work properly.
Although other mistakes are possible, invisibly this should be done first. It is not easy to repair a device remotely, so we are just guessing about possible errors so far.
If the fault disappears after removing the cover, it is recommended to place a plastic washer on the screw towers of the plastic housing (4 pcs.).
If it still does not work, check the LCD flexible cord carefully for a break somewhere. The cord goes into a connector, there may be no normal contact.
Here you can find more information about possible errors in the forum. Use the 'Search' button.
When you remove the cover, try calibrating the touch screen. Be sure to mark the outermost points as possible and then save the status. If a touch screen error is found, replace it with the current one firmware, because larger screen applications work with them correctly.
Read more on my web page as well.
I am confident that the problem will be solved.
If there is no mechanical damage, these are repairable defects.

73, Gyula HA3HZ
--
*** If you are not part of the solution, then you are the problem. ( ) ***

On Thursday, April 15, 2021, 11:20:34 a.m. EDT, Gyula Molnar <gyula.ha3hz@...> wrote:

Problem solved.
You need to delete the older 'NanoVNA-App.ini' file and then start .exe to create a new .ini file.
The program can then be used as usual.
73, Gyula HA3HZ
--
*** If you are not part of the solution, then you are the problem. ( ) ***

On Thursday, April 15, 2021, 1:39:34 p.m. EDT, Frank Mead <wa6ujj@...> wrote:

There is another computer software program designated? VNAR4.exe....which,
when run
give me the exact error message...Thanks,? Frank

On Thu, Apr 15, 2021 at 12:07 PM Frank Mead via groups.io <wa6ujj=
[email protected]> wrote:

On Thu, Apr 15, 2021 at 12:06 PM Frank Mead <wa6ujj@...> wrote:

Larry....my nano is an h...the nano functions by itself normally display,
calculation.
etc.? The software that I am trying to install on the computer is
nanovna-saver, v 3.8.
The saver software recognized the nano, com port, but when I input data
points on
the computer it sends me a message.

On Wed, Apr 14, 2021 at 12:00 PM Larry Rothman <nlroth@...>

wrote:

? Frank,
Although many would love to be able to read other's minds, we can't.
So - please tell us what application you're using that generates this
error and state how you're using it and what you did to generate the

error.

Also - what model of VNA do you have?

Thanks,
Larry

? ? On Wednesday, April 14, 2021, 12:42:37 p.m. EDT, Frank Mead <
wa6ujj@...> wrote:

? the software gives me the error message...
I have tried everything under the sun to correct the situation.
I am totally stumped.

On Wed, Apr 14, 2021 at 12:00 PM Larry Rothman <nlroth@...> wrote:

Frank,
Although many would love to be able to read other's minds, we can't.
So - please tell us what application you're using that generates this
error and state how you're using it and what you did to generate the error.
Also - what model of VNA do you have?

Thanks,
Larry

On Wednesday, April 14, 2021, 12:42:37 p.m. EDT, Frank Mead <
wa6ujj@...> wrote:

the software gives me the error message...
I have tried everything under the sun to correct the situation.
I am totally stumped.