开云体育

Not me, but..... Pasternack is a good supplier, although a bit pricey. https://www.pasternack.com/ I believe DigiKey also carries their products. Dave - W?LEV

Hello Stan, What model, manufacurer and from what supplier did you obtain the quality sma coax cables? Thanks. Al

Glad you found the problem. These cables have been problematic from day one. I've even had a few with the NANOVNAs. Even a few bad USB cables. Dsve - W?LEV

It is not uncommon for the sma-terminated pigtail cables that come with the nanovna to fail, or to not have been assembled well. Sometimes the shield is not soldered at the connector, so it passes

Dave, W0LEV, It's looking like an intermittent good then bad connection with the NanoVNA. The nanovna is connected with the unit's supplied connectors/coax and additional connector as needed for the

Thank you for the reply. I’m a long time NVIS emcomm loop user but I just moved and purchased the H4 to build a new loop for 80 and another for 40. I’ve had excellent success using the 10KW common

How are you connecting the NANOVNA? Identical to the method used for the RigExpert? Where does the trace show on the Smith Chart of the NANOVNA? Is the trace consistent with the SWR indication? Once

The Nanovna h4 in use was purchased from R&L Electronics a year or so ago. Last month I updated the software. The Nanovna has never given me "good" results as compared to a RigExpert AA 650 zoom when

40-meters between your target times of 1000 to 1400 local will be problematic if the fof2 is not at or above 7-MHz. Here in N. Colorado, of late, it has been, but over the last couple of years during

Ok... with a capacitor, inductor, capacitor + inducteur you can do a fixed two band matching network :) Thank -- F1AMM Fran?ois

I have almost the same antenna as you. Over 40 m no station arrives harder than on my trap doublet at 12 m height. In general, a station arrives between -6dB and -10dB on the loop than on the doublet.

Capacitor,inductor,capacitor

Please wat is a "CLC tuner" ? -- F1AMM Fran?ois

JJ Night To answer your question… There is nothing special about this antenna, other than it is a closed LOOP of 140 ft heavy wire #10 because I had a few hundred feet of this wire. I wanted good

Hi Mark, Roger, For NanoVNA-App (DiSlord version) these informations are calculated, but not plotted. They are displayed on the Info Panel (info button must be turned on), right side at the lower

You can’t go wrong with a loop. Would you walk me through how you went about testing it and tuning it? I have to build a new one myself and I’m curious how you connected it to your vna. JJ Knight

Anyone with basic IT expertise will tell you the same. <ve3fh@...> wrote:

NanoVNA app does not calculate/plot S21 impedance measurements. BTW S21 impedance measurements are not very accurate using NanoVNA's because they do not do 12 point error calibration and do not have

ae1th@, you mention this is the case with gift cards... I can see that as being a policy. Gift cards, while being great options, they have no real tracking ability especially on the internet. Many

How are folks doing on a 40m NVIS antenna for daytime short-range COMS? A bit more tweaking of my 40m closed LOOP NVIS antenna for 7075 kHz Less than 1.5:1 SWR across 40m band Over 50dB return loss at