开云体育

The language isn't changing because there is no English translation of this article on the site. The language choice menu "works" for content that has an English version, and doesn't when it doesn't

Hi I have installed the latest version on my Nanovna H v3.2 Everything seems OK except that I can not save date and time. In VERSION , time is 2000/01/01 00:00:30 (LSE) and I can not change it Any

I can try understand source of problem. For this need: Flash this debug firmware Connect device to PC Use NanoVNA-App (download from here

Re: Number of points, I do not know of any downside except perhaps a slower sweep. There are software applications which will take control of the VNA and allow a 10,001 or greater point sweep. Having

Re: language not changing, I have noticed some other sites where this is happening, so there may be a more widespread issue. Amazon Web Services had an outage a week or so ago, and I noticed little

I have flashed the latest firmware for my H4 and that went well but I am still unable to save a trace to the SD card. I consistently get the "fail write" error message. Has anyone tried to save to

Hi Lawrence, That's not my site.? Gyula HA3HZ decided to hijack my thread to push his own outdated document, which has nothing to do with what I had posted (and very impolite, I might add). It's his

Tim, *DO NOT* include denigrating comments directed at other list members in your posts. They will get you put on moderation, or banned, very quickly. DaveD, co-owner

Rich AI7KI I am probably more newbie than you and not qualified to answer the question. But I may be able to answer part of the question. I own a NanoVNA-H. The firmware supports more than ten

So (newbie here) I've seen some versions of nanoVNA that capture 1000 data points rather than 101. What are the consequences of the larger number of points? Thanks, Rich AI7KI wrote:

David, Thanks so much for you input, proper coupling internal to the circuit is surely interfered with by the probe. Good point to consider. Due to this and a number of other reasons, I have decided

Dave, That "spike" was the exact reason for my post. I was worried about destroying my NanoVNA even though no outside data was sent to it. Even though I would not be injection signals in circuits fed

Not everyone uses Chrome, and don't you think that he should know his translate isn't working? And you don't seem to be doing much with your life by complaining about people trying to help. Mike

Stan, Yes, I had already picked up on that. Also picked up on degradation outside the calibration range. My post was sent out before I understood the full implications of calibration Thanks a lot, 30

If Chrome will do the translation, does it matter that that feature on the site doesn't work? Or are you just whining because you have nothing better to do with your life?

Stan: All very good comments. I would like to expand on your statement regarding calibration interpolation. How "nice" a job it does depends somewhat on the quality of the instrument and setup

I realize that, but using translate on Chrome doesn't fix the problem that his page is broken. Mike Willis Register your consent or check if you are a registered Organ Donor at: *beadonor.ca

If you use chrome that will translate for you Rob

Same here, Selecting English doesn't change things. Mike Willis Register your consent or check if you are a registered Organ Donor at: *beadonor.ca <http://donor.ca>* llaassllaaass@...> wrote:

Hi, I just went to your site. When I selected English, the language did not change. I tried to reload and still (after selecting English) the language stayed the same. Thank you, larry