开云体育

If the owner/admin goes to SETTINGS and scrolls down to the WIKI section there is something called a STICKY WIKI PAGE. This can be whatever WIKIPage you want a (previously created WIKI pages is

============================================================= Believe me Larry, Even with a sign post like that you will get the occasional message asking how to locate the Wiki and File pages : )

The octave code is a direct translation of the python code in nanoVNA-saver. If you need python than go look at nanoVNA-saver or ask Rune to enable the measurement of calibration input from CH1

I use a small octave scrip to import a touchstone files in rectangular format. You do have to replace the '!' in the input file with '#' but than all you need is But you could also use octave to load

Something like the attached image?

Hi alan I got mine to use with SDR and RF noise generator, but guessed that it might be better than nanoVNA internal bridge, which turns out to be good enough (and much easier) for my measurements, so

On Mon, Dec 2, 2019 at 08:21 AM, <erik@...> wrote: "... using the external bridge and the calib.m routine will calculate the calibration. You can then use CH1 (port 2) to do S11 measurements

Hi Herb, I don't know if David can push a customized Welcome email to new members - he was going to try but I didn't hear back if it worked.That is one of the reasons I asked him to place the two Wiki

On Mon, Dec 2, 2019 at 07:55 AM, Oristo wrote: " Our Wiki main page has got rather long. Breaking it into separate pages e.g. hardware vs firmware vs software vs documents vs drivers might help for

Hi Larry - I can do that, but our Wiki pages seemingly do not support editing by html, only viewing. If I figured out how edit the Wiki HTML, it would already be done.

For those brave enough to try octave I have here an implementation in octave of the same calibration routine that is inside nanoVNA-saver. You only have to import the three measurements from CH1 (port

This is a self contained measurement device, A Bridge. The vna is not required although it could be used to replace the voltmeter or SA. The bridge output provides a null in output voltage and the

Oristo, You might want to browse a few other groups.io forums that have sub-pages and inspect their HTML to see how they are constructed.I have a feeling that feature costs $$ over the free version

Hi Herb - Our Wiki main page has got rather long. Breaking it into separate pages e.g. hardware vs firmware vs software vs documents vs drivers might help for directing new folks, but then they might

Hi ! I could not import s1p files from Rigexpert AA 54 ... No problem with MOD v2. Not a big deal, but wish to let You know ... Have a nice day!

Hello again GIN & PEZ; If you don’t mind, can you please post again your complete and current set of equations, and present them in a black on white format more conducive to printing. The format you

Gunthard, I re-posted your message to the NanoVNA-F group and your contribution has been well received there. - Herb

=========================================================== I'm petty sure your firmware version is the one currently delivered with hugen's new Nano-VNA-H model which is the same as his public

Good morning, and thank you for the add. I understand the original designer is here, and the nanoVNA is available from him? Thank you again, Dave AB5S

i was unable to find my fw version there tho,thats why i asked.