开云体育

There *is* only one board, so you're probably looking at just buying a nanoVNA, and having a spare battery and LCD display.? You might ask whoever you bought yours from if they'll sell you just the

Doesn't look like it. Will work on that thanks!

Do you have sip installed in Python?

How exactly do I change the PyQT restriction? I'm computer literate, but not familiar with Python at all. The original install instructions I found didn't have that step, so I'm wondering if that

so then, try calibrating from the saver program... and if it crashes, try first to calibrate from the device itself? :)

Hello, I was using NanoVNASaver yesterday afternoon, successfully without any problems. I went to have dinner, using my laptop to document my work in PowerPoint. I came back home in the evening, fired

Hi All, This afternoon I was succesfully using my NanoVNA H4 with NanoVNA Saver -- no problems. After working over dinner in PowerPoint on some documentation I came back home, tried to fire up NanaVNA

I accidently transmitted 12w into my connected nanovna and caused some damage to the software or components, not sure but it cannot read SWR any longer. It still uploads firmware etc but does not

I suspected as much. Best to have a known length of the cable to be measured. Then one can get the actual VF. Thanks, Stan. Brian D KF6BL

Roger: Bingo! I used the wrong .dfu. Downloaded -H4 and I am back in business. I owe you big time. Thanks for all your help. Fred WD9HNU

On Mon, May 23, 2022 at 07:25 AM, Fred Piering wrote: Fred, Are you sure you are using the correct DFU file for the -H4? If you use the -H you will get a black screen. You need to use the "Upgrade"

Hello Igor: Thank you for the comprehensive video. I performed the task as you showed, with the latest dfu file. It appeared to function as your video showed. However, I am still left with a black

IMO, this would be stupidly cheap if it wasn't for the fact that the other nanoVNAs are so ridiculously cheap. Check the price of any way less capable graphical antenna analyzer for comparison. Even

Roger, Many thanks for your comments, links, and photos. I completely agree about the calibration kit, although I'm more likely to be using it with SMA devices most of the time. The dynamic range

Chris, Thanks for your comments. I agree about the price, although these days prices are always higher than expected! It was the large screen which attracted me, and I don't know of any other 7-inch

Attached are some photos showing what you get in the box and what it looks like inside. What I find disappointing is that it does not come with an N connector calibration kit. Inside it uses a SMA to

This is the latest product from SYSJOINT (one of the developers of the NanoVNA-F). There is a Chinese version and an English version and they are not compatible according to the manufacturer. The Web

WOW, you searched the internet... WOW, what a novel idea, would be cool if others were to think of that... AND put their name on their post... John

A quick search on the internet yielded that it is a 75ohm-based VNA with a generator, like the NanoVNA. I also found a number of sites that had the manuals. 73 Evan AC9TU

can anyone tell me what the WILTRON 6407 RF ANALYZER does,is it the same as a vna,or more,cheers.