开云体育

This should help. That error occurs when the mouse is positioned any where on the graphics window and there is NO valid data trace written on the screen. Once there is a trace present, no error. If

Has anyone done a "cable de-embedding" using scikit-RF to do the calibration? that is, measure S,O,L at the end of each cable, then measure the DUTs and back out the cable?

I use the builtin generator in the NanoVNA to help me put my old vacuum tube rigs solidly on a net frequency before I begin calling an SSB net.?? Without that, I have to call for help and ask

You don't need a signal generator for use with the NanoVNA. It does its own calibration using the built-in signal generator. And if you are considering using the NanoVNA as some type of spectrum

HI Dennis TINYSA is a very good signal source to me. And enough stable indeed. 73s de Gabriele, I4JXE Inviato dal mio telefono Huawei -------- Messaggio originale -------- Da: Michael

4

TinySA perhaps? - Michael.

Greetings to all! Looking for a signal generator with accurate and stable power output so that I can use it with NANOVNA for calibration etc. Besides the RF EXPLORER COMBO one, any else worth to

Roger, Thanks very much for the help. The problem is resolved. The developers of NanoVNA-App did an exceptional job. This is a really great piece of software. 73, Kent AA6P

You have to make su

I have NanoVNA-App-1.1.206 up and running on Windows 10 20H2 with a NanoVNA-H and DiSlord Firmware v1.0.39. Everything seems to work and I have also uploaded firmware. However, the data that is

Before continuous calibration, start continuous scanning. -- *** If you are not part of the solution, then you are the problem. ( http://ha3hz.hu/ ) ***

Hi Don't forget that 206 has the calibration problem I mentioned a few days ago or at least it does with Windows 7 64bit and my H4. John

http://ha3hz.hu/images/download/NanoVNA-App-1.1.206.rar

Thank you Larry. I think I might have just misunderstood portion of that thread and the top one on this.

It's not in the folder, look about 5- 6 messages back and you'll see a link in Gyula's post On Sat., 17 Apr. 2021 at 6:05 p.m., Ramon S via groups.io<ve7rvs@...> wrote: I might be the

I might be the only one missing it, but my old eyes :( can't seem to find the mentioned updated Nano-VNA-app in the PC Software folder...

Charlie, The app has no instructions. It was written by the author for her own use and became very popular, so she improved to the point where it is an outstanding application.? With that said, there

Is there a help file that goes with this in English? I have a NanoVNA-H V.3.5 and it works great with Saver, but dont know if this app works with it and how to use it.

My email client stopped showing me images, so I found them on the webpage. Nanosaver is not really being maintained at this point in time but since it's open-source and on GitHub, you can play with