@ warren
Your nanovna is ver 3.1 printed on pcb with shields for three sections.
Is it the latest PCB Version.
Is internal battery necessary for saving Calibration data.
73
de VU2PGB
VEEN
toggle quoted message
Show quoted text
On Fri, Sep 27, 2019, 11:59 PM Warren Allgyer <allgyer@...> wrote:
This is the bottom side of the shielded version. The shields are on the
right and cover the RF portions. Many..... most maybe.... do not have these
shields. If yours does not, do not fret. They make no significant
difference in practical use.
The space on the lower left is where the battery goes, secured by a piece
of double sided tape or a dab of contact cement. Battery solder tabs are in
the upper left corner.
WA8TOD