Hej Bo,
I'll address the port numbering first: Port 0 and Port 1 should probably be
"Ch0" and "Ch1", and are taken from the port numbering on the physical
device:
While it's quite confusing to have S11 be reflection on port 0, and S22 be
reflection on port 1, that's a physical decision design ... ;-)
I'll address your other comments (thank you for them!) as I go through the
thread.
--
Rune / 5Q5R
toggle quoted message
Show quoted text
On Fri, 27 Sep 2019 at 20:34, Bo, OZ2M <groups.io@...> wrote:
One more thing.
It might be an idea to change the name of Port 0 to Port 1 and Port 1 to
Port 2 in the S/W GUI so it matches S1x and S2x etc. instead of e.g. S10 ...
I acknowledge that in programming the starting point if often zero (0) and
not one (1). But from an RF point of view it will probably be good karma.
Bo