Hi Bruce,
good to hear that it works! Averaging is on the roadmap, probably for
0.0.11 (or 0.1.0 or 1.0.0, however I name it)
--
Rune / 5Q5R
toggle quoted message
Show quoted text
On Wed, 18 Sep 2019 at 18:56, Bruce KX4AZ <bruce@...> wrote:
I tried the 1500 MHz firmware yesterday and was happy to see that
nanoVNAsaver worked with the extended range. Of course, with the very weak
signal levels above 900 Mhz the data plots are quite noisy. It would be
wonderful if the software could be set to average multiple scans in order
to increase the S/N ratio.
