When I made mine.? I used some jumpers and a bnc-bnc barrel in the middle to make up for the bnc T (about the same length), calibrated with all that attached, then just changed the barrel to the BNC and tuned the stubs.? Worked fine for us for the Idaho QSO party.
KI0E
toggle quoted message
Show quoted text
On 3/31/2020 1:10 PM, Bill wrote:
Has anyone used the nanovna to make tunes coaxial stubs? I was thinking you'd need to get rid of the jumper which would add length to the overall stub. I picked up an SMA to SO-239 connector which hopefully would do away with the extra cable.
Anyone have any tips for this?
Thanks
Bill K4FX
